prikaz prve stranice dokumenta Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5
Access restricted to students and staff of home institution
undergraduate thesis
Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:970110
Čulina, Jakov
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Čulina, J. (2020). Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:970110

Čulina, Jakov. "Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:970110

Čulina, Jakov. "Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:970110

Čulina, J. (2020). 'Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:970110

Čulina J. Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:190:970110

J. Čulina, "Izrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:970110

Metadata
TitleIzrada programa za obradu rotacijskog izratka na NC tokarilici uporabom programskog paketa CATIA V5
Title (english)Development of a program for NC lathe machining of cylindrical part using CATIA V5
AuthorJakov Čulina
MentorKristina Marković (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberKristina Marković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada je napraviti NC program za strojnu obradu na NC tokarskom stroju koristeći CATIA V5 programski paket. Detaljno su objašnjeni svi koraci prilikom izrade NC programa u Lathe Machining (tokarska strojna obrada) funkciji Machining (strojna obrada) modula: izbor postavki odabranog stroja za strojnu obradu (koordinatni sustav, položaj zamjene alata itd.), operacija grubog tokarenja, operacija stvaranja provrta, operacija finog tokarenja i operacija tokarenja navoja. Rad je napravljen u obliku priručnika za rad u CATIA V5 CAM (računalom pomognuta strojna obrada) modulu gdje su kroz popratni tekst i slike razrađene i rastumačene gotovo sve dostupne opcije navedenih operacija strojne obrade. Izrađeni NC program se naknadno sprema u obliku G naredbi koje se mogu učitati u unaprijed određen model NC tokarskog stroja.
Abstract (english)
The aim of this paper is to create an NC program for the machining operation on an NC lathe using the CATIA V5 software package. All steps taken in creating the NC program in Lathe Machining function of Machining module are explained in detail: selection of machining machine settings (defining the coordinate system, tool change point etc.), Rough Turning operation, Drilling operation, Profile Finish Turning operation and Thread Turning operation. Paper is made in a form of tutorial for work in CATIA V5 CAM module where almost all available options of used machining operations are elaborated and clarified trough the accompanying text and images. Created NC program is subsequently saved in the form of the G code that can be loaded into a predefined NC lathe model.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:970110
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-30 06:29:07