prikaz prve stranice dokumenta Dijaloško programiranje glodaćeg obradnog centra
Access restricted to students and staff of home institution
undergraduate thesis
Dijaloško programiranje glodaćeg obradnog centra
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:883552
Martinović, Antonio
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Martinović, A. (2020). Dijaloško programiranje glodaćeg obradnog centra (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:883552

Martinović, Antonio. "Dijaloško programiranje glodaćeg obradnog centra." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:883552

Martinović, Antonio. "Dijaloško programiranje glodaćeg obradnog centra." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:883552

Martinović, A. (2020). 'Dijaloško programiranje glodaćeg obradnog centra', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 05 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:883552

Martinović A. Dijaloško programiranje glodaćeg obradnog centra [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 July 05] Available at: https://urn.nsk.hr/urn:nbn:hr:190:883552

A. Martinović, "Dijaloško programiranje glodaćeg obradnog centra", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:883552

Metadata
TitleDijaloško programiranje glodaćeg obradnog centra
Title (english)Conversational programming of milling machine center
AuthorAntonio Martinović
MentorZoran Jurković (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2020-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Iako je u današnje vrijeme najzastupljenije CAD/CAM programiranje, dijaloško programiranje se koristi za obradu jednostavnijih dijelova gdje nema puno tolerancija ili za korekciju već postojećeg programa. Najprije je bilo potrebno izraditi model samocentrirajuće naprave za bušenje, svu potrebnu dokumentaciju (radioničke nacrte, operacijske listove, planove alata) i tek onda je uslijedio unos programa na upravljačku jedinicu CNC alatnog stroja. Za praktični dio izrađena je samocentrirajuća naprava za bušenje na CNC glodalici te vodilice i navojna šipka na CNC tokarilici. Nakon svakog unosa podataka izvršena je virtualna simulacija putanje alata na Hurco WinMax zaslonu kako bi se prikazale greške ukoliko postoje i na vrijeme otklonile.
Abstract (english)
Although CAD/CAM programming is the most common nowadays, conversational programming is used to process simpler parts where there is not much tolerance or to correct an existing program. First it was necessary to make a model of a self-centering dowel jig, all the necessary documentation (part drawing, setup sheets, tooling sheets) and then the data was entered on the control unit of the CNC machine tool. For the practical part, a self-centering dowel jig was made on a CNC milling machine, as well as guides and a threaded rod on a CNC lathe. After each data entry, a virtual simulation of the tool path was performed on the Hurco WinMax screen to display errors if any and rectify in time.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:883552
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-01 09:31:04