prikaz prve stranice dokumenta Konstrukcija sklopa za dizanje tereta
Access restricted to students and staff of home institution
undergraduate thesis
Konstrukcija sklopa za dizanje tereta
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:480979
Martinović, Zvonimir
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Martinović, Z. (2020). Konstrukcija sklopa za dizanje tereta (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:480979

Martinović, Zvonimir. "Konstrukcija sklopa za dizanje tereta." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:480979

Martinović, Zvonimir. "Konstrukcija sklopa za dizanje tereta." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:480979

Martinović, Z. (2020). 'Konstrukcija sklopa za dizanje tereta', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:480979

Martinović Z. Konstrukcija sklopa za dizanje tereta [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:480979

Z. Martinović, "Konstrukcija sklopa za dizanje tereta", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:480979

Metadata
TitleKonstrukcija sklopa za dizanje tereta
Title (english)Construction of cargo lift components
AuthorZvonimir Martinović
MentorMarina Franulović (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberMarina Franulović (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu bilo je potrebno konstruirati sklop za dizanje tereta uz dane zahtjeve. Zadana je nosivost dizalice koja iznosi 1,5 t, te brzina dizanja tereta od 0,5 m/s. Budući da je dizalica namijenjena za manje prostorije, ostali zahtjevi su tokom proračuna i konstruiranja uzeti uzimajući u obzir taj faktor. U manjim prostorijama uobičajeno treba osloboditi prostor na tlu, pa je ova dizalica zapravo stropna konzolna dizalica. U uvodu su analizirane već postojeće konstrukcijske izvedbe te su ponuđena dva konstrukcijska rješenja. Nakon analize već postojeće konstrukcijske izvedbe i odabira prikladnog rješenja slijedi proračun mehanizma za dizanje propisanim normama za transportne uređaje, te zatim slijedi oblikovanje i proračun vitla i konzole dizalice. Za prikaz konstrukcijskog rješenja u 3D modelu i za izradu tehničke dokumentacije je korišten programski paket Catia P3V5R21.
Abstract (english)
In this final work it was necessary to construct cargo lift components with the given requirement. The default load capacity of the crane is 1,5 t and the load lifting speed is 0,5 m/s. The crane is intended for smaller rooms, and taking this factor into account, many other requirements were taken during the calculation and construction because of that account. In smaller rooms you usually need to free up space on the ground, so this crane is a ceiling cantilever crane. In the introduction, the already existing construction designs are analyzed, and two construction solutions are offered. After the analysis of the already existing design and the selection of a suitable solution, comes the calculation of the lifting mechanism prescribed by the standards for transport devices, followed by the design and calculation of the winch and crane console. Catia P3V5R21 software was used to display the construction solution in the 3D model and to prepare the technical documentation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:480979
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-01 09:35:04