prikaz prve stranice dokumenta Analiza strujanja kroz centrifugalnu crpku
Access restricted to students and staff of home institution
undergraduate thesis
Analiza strujanja kroz centrifugalnu crpku
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:825643
Rogović, Lovro
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Rogović, L. (2020). Analiza strujanja kroz centrifugalnu crpku (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:825643

Rogović, Lovro. "Analiza strujanja kroz centrifugalnu crpku." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:825643

Rogović, Lovro. "Analiza strujanja kroz centrifugalnu crpku." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:825643

Rogović, L. (2020). 'Analiza strujanja kroz centrifugalnu crpku', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:825643

Rogović L. Analiza strujanja kroz centrifugalnu crpku [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:825643

L. Rogović, "Analiza strujanja kroz centrifugalnu crpku", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:825643

Metadata
TitleAnaliza strujanja kroz centrifugalnu crpku
Title (english)Centrifugal pump flow analysis
AuthorLovro Rogović
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu izvšila se usporedba dva komercijalna CFD software-a koji koriste različite numeričke analize, metoda konačnih elemenata i metoda konačnih volumena. Usporedba je napravljena stvaranjem karakterističnih krivulja centrifugalnih crpki za različite volumetrijske protoke, 𝑄 = 1. . .7 𝑙/𝑠. Ti rezultati na kraju su uspoređeni sa rezultatima fizičkog ispitivanja kako bi se dobila relativna validacija dobivenih podataka.
Abstract (english)
In this paper, a comparison of two commercial CFD software using different numerical analyzes, the finite element method and the finite volume method, is performed. The comparison was made by creating characteristic curves of centrifugal pumps for different volumetric flows, 𝑄 = 1. . .7 𝑙/𝑠. These results were finally compared with the results of the physical test to obtain a relative validation of the data.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:825643
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-05 06:24:53