prikaz prve stranice dokumenta PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Access restricted to students and staff of home institution
undergraduate thesis
PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Rijeka: University of Rijeka, Faculty of Engineering, 2020. urn:nbn:hr:190:655791
Topić, Ivan
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Topić, I. (2020). PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:655791

Topić, Ivan. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:655791

Topić, Ivan. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2020. https://urn.nsk.hr/urn:nbn:hr:190:655791

Topić, I. (2020). 'PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:655791

Topić I. PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2020 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:190:655791

I. Topić, "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:190:655791

Metadata
TitlePROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Title (english)Process planning of the lower part of the piston
AuthorIvan Topić
MentorMladen Perinić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberMladen Perinić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2020-09-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog završnog rada je projektirati tehnološki proces za proizvodnju donjeg dijela klipa u količini od 200 komada godišnje. Prvi korak je odraditi analizu dijela s konstrukcijskog i tehnološkog stajališta i temeljem toga odrediti moguće izbore ulaznog materijala. Sljedeći korak je pomoću tehno-ekonomske analize odrediti najpovoljniji ulazni materijal. Nakon toga slijedi strukturiranje operacija i njihova razrada. Razradom operacija određujemo potrebne zahvate i parametre svakog zahvata za izradu proizvoda. Nakon toga izrađujemo potrebnu tehnološku dokumentaciju i za sam kraj potrebno je izračunati ekonomsku i produktivnu brzinu rezanja za jednu grubu i jednu finu obradu kako bi bili sigurni da su parametri dobro odabrani.
Abstract (english)
The aim of this final paper is to design technological process of the production of the lower part of the piston in the amount of 200 pieces per year. First step is to analyze design and technological point of view of the part to determine possible forms of input material. Next step is using techno-economical analysis to choose optima form of input material This is followed by the structuring and elaboration of operations. Each operation is split into procedures and parameters for every procedure are determined for manufacturing product. Based on that technological documentation is made and at the end cutting speeds for one roughing and finishing procedure have been calculated to ensure parameters are chosen correctly.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:655791
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-06 06:36:51