prikaz prve stranice dokumenta PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Access restricted to students and staff of home institution
master's thesis
PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:446513
Mišak, Anton
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Mišak, A. (2021). PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:446513

Mišak, Anton. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:446513

Mišak, Anton. "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:446513

Mišak, A. (2021). 'PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:446513

Mišak A. PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:446513

A. Mišak, "PROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:446513

Metadata
TitlePROJEKT TEHNOLOŠKOG PROCESA ZA DONJI DIO KLIPA
Title (english)Process planning of the lower part of the piston
AuthorAnton Mišak
MentorMladen Perinić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberDuško Pavletić (član povjerenstva)
Committee memberMladen Perinić (član povjerenstva)
Committee memberSandro Doboviček (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2021-01-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj rada je izraditi projekt tehnološkog procesa za donji dio klipa u količini od 250 komada godišnje. Projekt tehnološkog procesa za donji dio klipa potrebno je izraditi prema zadanom nacrtu za gotov proizvod klipa i ulazni poluproizvod (odljevak) koji su dobiveni uz zadatak rada te priloženi u prilogu. U sklopu izrade projekta tehnološkog procesa prvo se provodi konstrukcijska i tehnološka analiza izratka, analiza zadanog materijala od kojeg je izrađen proizvod, tehno – ekonomska analiza kojom se analizira koji tip ulaznog poluproizvoda je najisplativiji za zadani broj komada izrade godišnje. Rezultat tehno – ekonomske analize pokazao je da ulazni poluproizvod treba biti u obliku odljevka složenije geometrije. Nakon odabira ulaznog poluproizvoda detaljno su razrađeni zahvati i strukturirane operacije. Definirana su alati te strojna oprema. Režimi obrade za svaki zahvat definirani su prema preporuci proizvođača alata „Sandvik“. Dobivena su vremena trajanja za zahvate i operacije te je na temelju dobivenog napravljena tehnološka dokumentacija. U tehnološku dokumentaciju koja se nalazi u prilogu ubrajamo popis strojeva, popis alata, popis operacija te operacijske listove. Nakon izrađenog analitičkog postupka izrađena je simulacija koristeći programski paket Mastercam. Nakon provedene simulacije uspoređena su vremena dobivena ručnim razradom operacija i vremena dobivena simulacijom u programskom paketu Mastercam.
Abstract (english)
Aim of this thesis is process planning of the lower part of the piston in annual requirements of 250 pieces. Process planning of the lower part of the piston needs to be planned according to drawing of a finished product of piston and semi – manufactured form of casting which are provided in assignment and attached in attachment. As part of process planning, what it needs to be created first is workpiece construction and tecnhnological analysis, analysis of production material, economical analysis of input material forms that define the type of semi – manufactured form which is most profitable according to annual requirements. The result of economical analysis of input material forms is casting with complex geometry. After, semi – manufactured form is defined, all operations and actions are elaborated. Required tools and machines are selected. Machining parameters for each operation are defined on suggestion by tool manufacturer „Sandvik“. Technological documentation is created based on obtained time values. Technological documentation includes machine list, tooling list, list of operations and operation sheets. Simulation of process, with use of software Mastercam, is made right after process planning is done. After completing of simulation, the time values obtained in analytical process planing and time values given by Mastercam simulation were compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:446513
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-06 08:22:19