prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela GH.20-DT.98
Access restricted to students and staff of home institution
master's thesis
Postupak toplinske obrade strojnog dijela GH.20-DT.98
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:850371
Horvat, Teo Grgur
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Horvat, T. G. (2021). Postupak toplinske obrade strojnog dijela GH.20-DT.98 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:850371

Horvat, Teo Grgur. "Postupak toplinske obrade strojnog dijela GH.20-DT.98." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:850371

Horvat, Teo Grgur. "Postupak toplinske obrade strojnog dijela GH.20-DT.98." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:850371

Horvat, T. G. (2021). 'Postupak toplinske obrade strojnog dijela GH.20-DT.98', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:850371

Horvat TG. Postupak toplinske obrade strojnog dijela GH.20-DT.98 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:850371

T. G. Horvat, "Postupak toplinske obrade strojnog dijela GH.20-DT.98", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:850371

Metadata
TitlePostupak toplinske obrade strojnog dijela GH.20-DT.98
Title (english)Heat treating process of workpiece GH.20-DT.98
AuthorTeo Grgur Horvat
MentorDario Iljkić (mentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberMarino Brčić (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberPaolo Blecich (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
Rijeka
Defense date and country2021-03-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu je opisan postupak toplinske obrade cementiranja strojnog dijela GH.20-DT.98 i mjerenje tvrdoće kako bi se potvrdila tražena svojstva. Strojni dio GH.20-DT.98 je izrađen od čelika oznake C15E. Cijeli postupak toplinske obrade je detaljno opisan. Odabrani parametri toplinske obrade kako bi se postigla tražena svojstva su ispravno određeni, što je potvrđeno ispitivanjem tvrdoće na tvrdomjeru. Cilj postupka cementranja strojnog dijela GH.20- DT.98 je bio povećanje otpornosti na trošenje, a pritom zadržavanje žilavosti strojnog dijela. Cijeli postupak toplinske obrade cementiranja kao i mjerenje tvrdoće je popraćen slikama.
Abstract (english)
This thesis describes the heat treatment process of cementing machine part GH.20-DT.98 and hardness measurement to confirm required properties. The machine part GH.20-DT.98 is made of steel marked C15E. The whole heat treatment process is described in detail. Selected heat treatment parameters to achieve the required properties were correctly determined, which was confirmed by the hardness test on the hardness tester. The aim of the machine part cementing process GH.20-DT.98 was to increase the wear resistance while maintaining the toughness of the machine part. The whole process of heat treatment of cementation as well as hardness measurement is accompanied by pictures.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:850371
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-07 06:49:42