prikaz prve stranice dokumenta Numerička analiza naprezanja zuba zupčanika
Access restricted to students and staff of home institution
master's thesis
Numerička analiza naprezanja zuba zupčanika
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:150562
Kovaček, Adriano
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Kovaček, A. (2021). Numerička analiza naprezanja zuba zupčanika (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:150562

Kovaček, Adriano. "Numerička analiza naprezanja zuba zupčanika." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:150562

Kovaček, Adriano. "Numerička analiza naprezanja zuba zupčanika." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:150562

Kovaček, A. (2021). 'Numerička analiza naprezanja zuba zupčanika', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 06 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:150562

Kovaček A. Numerička analiza naprezanja zuba zupčanika [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 November 06] Available at: https://urn.nsk.hr/urn:nbn:hr:190:150562

A. Kovaček, "Numerička analiza naprezanja zuba zupčanika", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:150562

Metadata
TitleNumerička analiza naprezanja zuba zupčanika
Title (english)Numerical stress analysis of the gear tooth
AuthorAdriano Kovaček
MentorMarina Franulović (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberMarina Franulović (član povjerenstva)
Committee memberMarko Čanađija (član povjerenstva)
Committee memberBoris Delač (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2021-03-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu izvršena je provjera raspodjele naprezanja na boku i korijenu zuba pogonskog i gonjenog zupčanika uslijed zahvata. U prvom dijelu rada opisane su osnove zupčastih prijenosnika i teorijske osnove numeričke analize primjenom metode konačnih elemenata. Projektni i kontrolni proračun zahvata zupčanika za prijenos snage od 20 kW i brzinu vrtnje pogonskog zupčanika od 1750 min-1 uz prijenosni omjer 3,5 izvršeni su prema ISO 6336 standardu pomoću programskog paketa KISSsoft uz procjenu relevantnih faktora. Definirana geometrija iz projektnog proračuna zatim je upotrebljena kao polazišna točka modeliranja i diskretizacije zupčanika u zahvatu. Numerička analiza metodom konačnih elemenata provedena je u programskom paketu Ansys Workbench. U svrhu validacije rezultata, na mreži konačnih elemenata proveden je test konvergencije. Rezultati numeričke analize zatim su uspoređeni sa rezultatima analitičkog proračuna na temelju čega je definiran zaključak ovog rada.
Abstract (english)
This paper deals with the analysis of stress distribution on the flank and the root area of pinion and gear tooth caused by the meshing process. The first part of the paper describes the basics of gears and the theoretical foundations of numerical analysis using the finite element method. The design and control calculation of gear system capable of transmitting 20 kW of power and with the rotational speed of the pinion of 1750 min-1 with a gear ratio of 3,5 were performed according to ISO 6336 using the KISSsoft software with the assessment of relevant factors. Defined geometry from the design calculation was then used as a starting point for modeling and discretization of meshed gears. Numerical analysis using finite element method was performed using Ansys Workbench software. A convergence test was then performed on the defined finite element mesh as a measure of validity. The results of the numerical analysis were then compared with the results of analytical calculation on the basis of which the conclusion of this paper was drawn.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:150562
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-07 07:18:32