prikaz prve stranice dokumenta Idejni projekt proizvodnog sustava strojne obrade
Access restricted to students and staff of home institution
master's thesis
Idejni projekt proizvodnog sustava strojne obrade
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:547451
Čanković, Mateo
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Organisation and Operational Management

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Čanković, M. (2021). Idejni projekt proizvodnog sustava strojne obrade (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:547451

Čanković, Mateo. "Idejni projekt proizvodnog sustava strojne obrade." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:547451

Čanković, Mateo. "Idejni projekt proizvodnog sustava strojne obrade." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:547451

Čanković, M. (2021). 'Idejni projekt proizvodnog sustava strojne obrade', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 06 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:547451

Čanković M. Idejni projekt proizvodnog sustava strojne obrade [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 November 06] Available at: https://urn.nsk.hr/urn:nbn:hr:190:547451

M. Čanković, "Idejni projekt proizvodnog sustava strojne obrade", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:547451

Metadata
TitleIdejni projekt proizvodnog sustava strojne obrade
Title (english)Conceptual Design of Manufacturing System
AuthorMateo Čanković
MentorSandro Doboviček (mentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberMladen Perinić (član povjerenstva)
Committee memberTomislav Senčić (član povjerenstva)
Committee memberSandro Doboviček (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Organisation and Operational Management)
Rijeka
Defense date and country2021-05-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Unutar ovog diplomskog rada izrađen je primjer proizvodnog sustava strojne obrade četiri proizvoda za slučaj kada bi se godišnja količina proizvodnje uvelike povećala. Na početku rada odabire se ulazni repromaterijal, izrađuju se planovi obrade te odabiru odgovarajuće proizvodne opreme na kojima će se odvijati proizvodnja. Unutar operacijskih listova planova obrade prikazani su svi podaci o proizvodu, načinu proizvodnje, vremenu trajanja i opremi na kojoj se odvija. Nakon toga obavljeno je grupiranje proizvoda procesnom metodom grupiranja kojom su se dobila dva najoptimalnija modela proizvodnog sustava sa po dva proizvoda. Određen je način transporta, izrađeni prostorni rasporedi i hodogrami obrade, određena potrebna radna snaga. Dobiveni rezultati grupiranja prikazani su grafičkim prikazom na kojem se može očitati ciklus obrade, kao i ukupno trajanje obrade za pojedine proizvode unutar proizvodnih sustava.
Abstract (english)
Within this graduate thesis, an example of a production system for machining four products was made in case the annual production volume would increase significantly. At the beginning of the work, the input raw material is selected, processing plans are made and the appropriate production equipment is selected on which the production will take place. All data on the product, the method of production, the duration and the equipment on which it takes place are displayed within the operating sheets of the processing plans. After that, the products were grouped by the process method of grouping, which gave the two most optimal models of the production system with two products each. The mode of transport was determined, spatial schedules and processing schedules were made, and the required workforce was determined. The obtained grouping results are presented in a graphical representation on which the processing cycle can be read, as well as the total processing time for individual products within the production systems.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:547451
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-07 08:39:51