prikaz prve stranice dokumenta KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA
Access restricted to students and staff of home institution
undergraduate thesis
KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:678665
Švenda, Gabrijel
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Švenda, G. (2021). KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:678665

Švenda, Gabrijel. "KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:678665

Švenda, Gabrijel. "KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:678665

Švenda, G. (2021). 'KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 14 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:678665

Švenda G. KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 July 14] Available at: https://urn.nsk.hr/urn:nbn:hr:190:678665

G. Švenda, "KONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:678665

Metadata
TitleKONSTRUIRANJE PRIHVATA I UTEGA ZA NOSIVU RUKU 3D SKENERA
Title (english)DESIGN OF FIXTURE AND WEIGHTS FOR 3D SCANNER LEVER ARM
AuthorGabrijel Švenda
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2021-03-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog završnog rada je konstruiranje prihvata i utega za nosivu ruku 3D skenera. Objašnjene su metode reverzibilnog inženjerstva i navedena je njihova primjena. Objašnjena je digitalna fotogrametrija, brza izrada prototipova i aditivna proizvodnja te se prikazao pregled stanja tehnike u području 3D skeniranja i 3D ispisa. U praktičnom dijelu ovog završnog rada se analizirala postojeća konstrukcija prihvata 3D skenera i nosive ruke. Metodama reverzibilnog inženjerstva se izradio digitalni model postojećeg prihvata 3D skenera i nosive ruke. Stvarna konstrukcija se prilagodila novim zahtjevima te su se uzeli u obzir izmjere, ograničenja i mogućnosti postojeće konstrukcije te smjernice za ispravno konstruiranje i oblikovanje modela predviđenih za izradu metodom 3D ispisa, te se izradio radionički crtež. Metodom 3D ispisa se izradio stvarni model nove konstrukcije prihvata. Konstruirao se i dimenzionirao set utega za nosivu ruku 3D skenera i izradili su se radionički crteži.
Abstract (english)
The topic of this work is the construction of a holder and weights for a carrying arm of a 3D scanner. The methods of reverse engineering are explained and their applications are stated. Digital photogrammetry, rapid prototyping and additive manufacturing are explained and an overview of the state of the art in the field of 3D scanning and 3D printing is presented. In the practical part of this work the existing construction of the 3D scanners holder and of the carrying arm was analyzed. A digital model of the existing 3D scanners holder and of the carrying arm was developed using reverse engineering methods. The actual construction was adapted to the new requirements, measurements and limitations and possibilities of the existing construction were taken into account, as well as the guidelines for a correct construction and design of models intended for 3D printing. The actual model of the new holder was created using 3D printing methods. A set of weights for the carrying arm of the 3D scanner was constructed and dimensioned. Technical drawings of the holder and weights were made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:678665
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-08 07:25:01