prikaz prve stranice dokumenta Primjena CAM programiranja
Access restricted to students and staff of home institution
undergraduate thesis
Primjena CAM programiranja
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:679572
Gojšić, Andreas
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Gojšić, A. (2021). Primjena CAM programiranja (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:679572

Gojšić, Andreas. "Primjena CAM programiranja." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:679572

Gojšić, Andreas. "Primjena CAM programiranja." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:679572

Gojšić, A. (2021). 'Primjena CAM programiranja', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:679572

Gojšić A. Primjena CAM programiranja [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:679572

A. Gojšić, "Primjena CAM programiranja", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:679572

Metadata
TitlePrimjena CAM programiranja
Title (english)Application of CAM programming
AuthorAndreas Gojšić
MentorZoran Jurković (mentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2021-01-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog završnog rada bio je prikazati mogućnosti primjene CAM softvera u strojnoj obradi na zadanom izratku. Temeljem 3D model izratka dobivenog pomoću softvera Autodesk Inventor isti softver je korišten i pri CAM programiranju. Nakon virtualne provjere za Heidenhain upravljačku jedinicu dobiven je NC program. Nakon toga, pripremljen je obradni centar (alati, materijal, NC program) i strojno obrađen izradak čime je praktično potvrđena primjena CAM programiranja.
Abstract (english)
The main goal of this final paper was to show the capabilities of CAD/CAM software in machining of parts. A program called Autodesk Inventor was used for both generating the 3D model of a given part and its NC code, which was generated for the Heidenhain control unit. At the end, a machining center (tools, material, NC program) was prepared and the workpiece was machined, thus showing and validating the use of CAM software in machining.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:679572
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-08 08:52:40