prikaz prve stranice dokumenta ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA
Access restricted to students and staff of home institution
undergraduate thesis
ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:409558
Zakšek, Paolo
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Zakšek, P. (2021). ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:409558

Zakšek, Paolo. "ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:409558

Zakšek, Paolo. "ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:409558

Zakšek, P. (2021). 'ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:409558

Zakšek P. ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:409558

P. Zakšek, "ANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:409558

Metadata
TitleANALIZA RAČUNALNOG I 3D TISKANOG MODELA ODABRANOG KONSTRUKCIJSKOG ELEMENTA
Title (english)ANALYSIS OF A DIGITAL AND 3D PRINTED MODELS OF A SELECTED MACHINE ELEMENT
AuthorPaolo Zakšek
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
Committee memberTea Marohnić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2021-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Svrha ovog rada bila je analizirati 3D ispisani model dobiven pomoću postupka reverznog inženjerstva odabranog konstrukcijskog elementa (nazuvice) i usporediti ga s izvornim konstrukcijskim elementom. Opisan je razvoj 3D tehnologije (3D skeniranja i 3D ispisa) i reverznog inženjerstva. Prikazane su osnove procesa reverznog inženjerstva, područja u kojem se može koristiti, ali i koje su glavne razlike u odnosu na klasično inženjerstvo. Objašnjene su odabrane metode 3D skeniranja i 3D ispisa te su navedeni primjeri područja gdje se mogu koristiti. Postupkom reverznog inženjerstva dobiven je 3D model nazuvice te je isti ispisan na 3D printeru. Uspoređene su odabrane dimenzije stvarnog i 3D ispisanog predmeta te utvrđene prednosti i ograničenja primijenjenih postupaka.
Abstract (english)
The aim of this thesis was to analyze a 3D printed model obtained using the reverse engineering procedure of a selected structural element (nipple) and compare it with the original structural element. The development of 3D technology (3D scanning and 3D printing) and reverse engineering is described. The basics of the reverse engineering process, the areas in which it can be used, but also the main differences in relation to conventional engineering are presented. Selected methods of 3D scanning and 3D printing are explained and examples of areas where they can be used are given. The reverse engineering process resulted in a 3D model of the nipple which was printed using a 3D printer. The selected dimensions of the actual and 3D printed object are compared and the advantages and limitations of the applied procedures are determined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:409558
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-11 06:51:26