prikaz prve stranice dokumenta Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj
Access restricted to students and staff of home institution
undergraduate thesis
Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:641837
Lukešić, Josip
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Lukešić, J. (2021). Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:641837

Lukešić, Josip. "Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:641837

Lukešić, Josip. "Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:641837

Lukešić, J. (2021). 'Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 03 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:641837

Lukešić J. Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 May 03] Available at: https://urn.nsk.hr/urn:nbn:hr:190:641837

J. Lukešić, "Konstruiranje podesivog modularnog postolja za univerzalni ispitni stroj", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:641837

Metadata
TitleKonstruiranje podesivog modularnog postolja za univerzalni ispitni stroj
Title (english)Design of an adjustable modular stand for universal testing machine
AuthorJosip Lukešić
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
Committee memberTea Marohnić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2021-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Konstruirano je podesivo modularno postolje koristeći isključivo prefabricirane strukturne i ostale elemente, prvenstveno za univerzalni ispitni stroj GALDABINI Quasar 50. Međutim moguće ga koristiti i za druge strojeve sličnih ili manjih izmjera i masa. U uvodnom dijelu razjašnjeni su zahtjevi i problematika za traženi slučaj. Nakon toga napravljena je analiza postojećih rješenja na tržištu te se usvajaju korisne karakteristike koje mogu biti od pomoći pri daljnjem konstruiranju. U nastavku je detaljno objašnjen tijek postupka konstruiranja postolja. Za svaki podsklop je posebno razjašnjen odabir i funkcija svakog korištenog elementa u njemu. Na kraju su svi kritični profili i elementi podvrgnuti kontrolnom proračunu kako bi se dokazala njihova dimenzijska ispravnost, odnosno da je cjelokupno postolje ispravno konstruirano i dimenzionirano. Računalni 3D model podesivog modularog postolja i sva pripadna nacrtna dokumentacija izrađeni su u programskom paketu Autodesk Inventor Proffesional 2018.
Abstract (english)
An adjustable modular stand has been designed primarily for the GALDABINI Quasar 50 universal testing machine, but it can also be used for other machines of similar or smaller dimensions and weights. In the introductory part, the requirements and issues for the requested case are clarified. After that, an analysis of existing solutions on the market is made and useful characteristics are adopted that can be helpful in further designing. The course of the stand design process is explained in detail below. For each subassembly, the selection and function of each element used in it is clarified separately. Finally, all critical profiles and elements are subjected to a control calculation in order to prove their dimensional correctness, that the entire stand is correctly designed and dimensioned. The computer 3D model of the adjustable modular stand and all related design documentation were created in the Autodesk Inventor Professional 2018 software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:641837
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-11 07:39:10