prikaz prve stranice dokumenta Konstruiranje mehaničke ručne automobilske dizalice
Access restricted to students and staff of home institution
undergraduate thesis
Konstruiranje mehaničke ručne automobilske dizalice
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:212993
Kukuljan, Ema
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Kukuljan, E. (2021). Konstruiranje mehaničke ručne automobilske dizalice (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:212993

Kukuljan, Ema. "Konstruiranje mehaničke ručne automobilske dizalice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:212993

Kukuljan, Ema. "Konstruiranje mehaničke ručne automobilske dizalice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:212993

Kukuljan, E. (2021). 'Konstruiranje mehaničke ručne automobilske dizalice', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 14 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:212993

Kukuljan E. Konstruiranje mehaničke ručne automobilske dizalice [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 July 14] Available at: https://urn.nsk.hr/urn:nbn:hr:190:212993

E. Kukuljan, "Konstruiranje mehaničke ručne automobilske dizalice", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:212993

Metadata
TitleKonstruiranje mehaničke ručne automobilske dizalice
Title (english)Design of a mechanical car jack
AuthorEma Kukuljan
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberTea Marohnić (član povjerenstva)
Committee memberKristian Lenić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2021-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Završni rad obuhvaća konstruiranje i dimenzioniranje trapezne ručne automobilske dizalice koja se koristi u hitnim slučajevima. U početnom je dijelu dan kratki osvrt na postojeće izvedbe i različite principe rada automobilskih dizalica. Koncept konstrukcije trapezne dizalice usvojen je u praksi zbog čega faza koncipiranja nije bila potrebna. Listom zahtjeva definiralo se određene konstrukcijske karakteristike. Proračunom pojedinih opterećenih dijelova dizalice vršila se provjera naprezanja i površinskih pritiska s obzirom na dozvoljene vrijednosti za odabrane materijale i usvojene dimenzije. Računalno modeliranje komponenti, odnosno sklopa trapezne dizalice, napravljeno je u softverskom paketu Autodesk Inventor 2018 na temelju dimenzijskih vrijednosti usvojenih proračunom. U istom je programu izrađena potrebna tehnička dokumentacija.
Abstract (english)
Undergraduate thesis encompasses the design and dimensioning of scissor car jack for emergency case use. In the preface, there is a short overview of existing designs and work principles of various different car jacks. The basic concept of mechanical car jack design is adopted and well refined, therefore the concept phase was not necessary. Certain design characteristics were determined by the list of demands. Strain and surface pressure analysis of individual parts was done based on allowed values for chosen materials and adopted dimensions. Computer aided design of the car jack's parts and assembly, based on the calculated dimensions, was done in Autodesk Inventor 2018. Technical documentation was created in the same software.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:212993
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-11 08:24:12