prikaz prve stranice dokumenta Određivanje hidrodinamičkih karakteristika propelera
Access restricted to students and staff of home institution
undergraduate thesis
Određivanje hidrodinamičkih karakteristika propelera
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:800612
Lučić, Borna
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Lučić, B. (2021). Određivanje hidrodinamičkih karakteristika propelera (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:800612

Lučić, Borna. "Određivanje hidrodinamičkih karakteristika propelera." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:800612

Lučić, Borna. "Određivanje hidrodinamičkih karakteristika propelera." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:800612

Lučić, B. (2021). 'Određivanje hidrodinamičkih karakteristika propelera', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 11 January 2025, https://urn.nsk.hr/urn:nbn:hr:190:800612

Lučić B. Određivanje hidrodinamičkih karakteristika propelera [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2025 January 11] Available at: https://urn.nsk.hr/urn:nbn:hr:190:800612

B. Lučić, "Određivanje hidrodinamičkih karakteristika propelera", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:800612

Metadata
TitleOdređivanje hidrodinamičkih karakteristika propelera
Title (english)Marine propeller hydrodynamic characteristics assessment
AuthorBorna Lučić
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2021-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema završnog rada je izraditi simulaciju za propeler u dva CFD rješavača i napraviti numeričku analizu te usporediti dobivene rezultate s eksperimentalno dobivenim rezultatima. Osim dijela gdje se izrađuje simulacija, u radu se obrađuje i teorijski dio o propeleru, tipovima strujanja i metodama rješavanja koje se koriste u programima. Prvi korak prilikom izrade simulacije je napraviti numeričku mrežu. Mreža je izrađena u programu Numeca. Napravljena mreža učitava se u nekom od CFD rješavača. U ovom slučaju koristili su se CFD rješavač Fluent iz paketa Ansys te AcuSolve iz paketa Altair HyperWorks. U rješavačima su postavljeni isti uvjeti rješavanja simulacije da bi usporedba rezultata bila čim preciznija. Dobiveni rezultati vrlo dobro su aproksimirali rezultate dobivene eksperimentalnim ispitivanjem.
Abstract (english)
The subject of this paper was to design a simulation for a propeller in two CFD solvers, make a numerical analysis and compare the results obtained by this method with the results obtained experimentally. In addition to the simulation part, the paper also deals with the theoretical section about the propeller, flow types and equation solving methods used in the programmes. The first step in designing a simulation is creating a numerical grid. The mesh was created in the Numeca programme. The mesh created is then imported into one of the CFD solvers. In this case, the CFD solvers used were the Fluent programme from the Ansys software and AcuSolve from the Altair HyperWorks software. To make sure the comparison of results would be as precise as possible, identical conditions for the simulation solving were set in the solvers. The results obtained using CFD approximated the results obtained from the experimental test very well.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:800612
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-11 08:30:38