prikaz prve stranice dokumenta Primjena AHP metode pri odabiru 3D printera
Access restricted to students and staff of home institution
master's thesis
Primjena AHP metode pri odabiru 3D printera
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:888650
Nišević, Ivan
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Nišević, I. (2021). Primjena AHP metode pri odabiru 3D printera (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:888650

Nišević, Ivan. "Primjena AHP metode pri odabiru 3D printera." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:888650

Nišević, Ivan. "Primjena AHP metode pri odabiru 3D printera." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:888650

Nišević, I. (2021). 'Primjena AHP metode pri odabiru 3D printera', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:888650

Nišević I. Primjena AHP metode pri odabiru 3D printera [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:888650

I. Nišević, "Primjena AHP metode pri odabiru 3D printera", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:888650

Metadata
TitlePrimjena AHP metode pri odabiru 3D printera
Title (english)3D printer selection by using AHP method
AuthorIvan Nišević
MentorZoran Jurković (mentor)
MentorMladen Perinić (komentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2021-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom teoretskom dijelu ukratko su pojašnjene vrste aditivnih tehnologija koje se koriste u realnom sektoru. Također opisani su prednosti i nedostaci svake od njih, kao i opseg materijala koje pojedina tehnologija koristi. U nastavku su detaljno objašnjene četiri metode višekriterijskog donošenja odluka: MAUT, PROMETHEE, ELECTRE i AHP. U praktičnom dijelu rada analizom podataka uz primjenu AHP metode postavljen je glavni cilj uz pripadne kriterije i potkriterije. Cilj je bio odrediti optimalnu tehnologiju aditivne proizvodnje, uz postavljen dodatni uvjet da promatrana tehnologija mora imati industrijske i kućne (hobi) varijante strojeva. Temeljem tako dobivenih rezultata postavio se novi cilj, a to je određivanje optimalnog 3D printera. Rezultati su jasno prikazani te su detaljno objašnjeni utjecajni faktori na rezultate.
Abstract (english)
In the introductory theoretical part the types of additive technologies used in the real sector have been described. The advantages and disadvantages of every type are also described, as well as the scope of materials on disposal to every technology. Four methods of multicriteria decision making are explained in detail below: MAUT, PROMETHEE, ELECTRE and AHP. In the practical part of the paper, with the use of dana analysis and thorough research the main goal with it's criteria and subcriteria have been set for the AHP method. The goal was to determine the optimal technology of additive manufacturing, with the added condition that the observed technology must have an industrial as well as a house (hobby) variant of the machines. Based on the obtained results, a new goal was set, which was to determine the optimal 3D printer. The results have been clearly presented and the influencing factors on the results are explained in detail.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:888650
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-15 10:45:14