prikaz prve stranice dokumenta Osmišljavanje Stirling motora sa dvojnim pogonom
Access restricted to students and staff of home institution
undergraduate thesis
Osmišljavanje Stirling motora sa dvojnim pogonom
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:658998
Kolundžija, Jelena
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Marine Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Kolundžija, J. (2021). Osmišljavanje Stirling motora sa dvojnim pogonom (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:658998

Kolundžija, Jelena. "Osmišljavanje Stirling motora sa dvojnim pogonom." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:658998

Kolundžija, Jelena. "Osmišljavanje Stirling motora sa dvojnim pogonom." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:658998

Kolundžija, J. (2021). 'Osmišljavanje Stirling motora sa dvojnim pogonom', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 02 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:658998

Kolundžija J. Osmišljavanje Stirling motora sa dvojnim pogonom [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 May 02] Available at: https://urn.nsk.hr/urn:nbn:hr:190:658998

J. Kolundžija, "Osmišljavanje Stirling motora sa dvojnim pogonom", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:658998

Metadata
TitleOsmišljavanje Stirling motora sa dvojnim pogonom
Title (english)Conception of a dual power stirling engine
AuthorJelena Kolundžija
MentorTomislav Senčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberTomislav Senčić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Marine Engineering)
Rijeka
Defense date and country2021-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu opisan je Stirlingov kružni proces kao idejna shema po čijim se proračunima izrađuje istoimeni motor. Prikazani su osnovni koncepti Stirling motora kao što su alfa, beta, gama i linearni model. Opisane su i karakteristike radnog medija, tlaka i sustava podmazivanja te su se objasnile prednosti i mane svake od njih. Izrađen je termodinamički proračun za određivanje dimenzija kao što su: promjer cilindra, stapaj, radijus radilice kao i radijus paraboličnog zrcala dok su ostale dimenzije omjerima proizlazile iz njih. Motor se pokreće Sunčevom energijom dok je ima, a kada je nema pokreće se toplinom iz plamenika. Osim konstrukcije i priloženih nacrta motora, izrađen je i 3D model cijelog sustava zajedno s paraboličnim zrcalom i plamenikom.
Abstract (english)
The final paper describes the Stirling circular process as a conceptual scheme according to which the engine of the same name is made. The basic concepts of Stirling engines such as alpha, beta, gamma and linear model are presented. The characteristics of the working medium, pressure and lubrication system are also described and the advantages and disadvantages of each of them are explained. A thermodynamic calculation was made to determine the dimensions such as: cylinder diameter, rod, crankshaft radius as well as the radius of the parabolic mirror while the other dimensions were derived from them by proportions. The engine is powered by solar energy while it is there, and when it is not there it is powered by heat from the burner. In addition to the construction and attached engine designs, a 3D model of the entire system was made along with a parabolic mirror and burner.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:658998
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-19 12:07:13