prikaz prve stranice dokumenta Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction
Access restricted to students and staff of home institution
undergraduate thesis
Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:150679
Hodanić, Tin
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Hodanić, T. (2021). Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:150679

Hodanić, Tin. "Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:150679

Hodanić, Tin. "Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:150679

Hodanić, T. (2021). 'Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:150679

Hodanić T. Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:150679

T. Hodanić, "Analiza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:150679

Metadata
TitleAnaliza konstrukcije izlaznog vratila reduktora / Analysis of the gearbox output shaft construction
Title (english)Analysis of the gearbox output shaft construction
AuthorTin Hodanić
MentorMarina Franulović (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberMarina Franulović (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2021-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prvo je konstruirano izlazno vratilo dvostupanjskog reduktora u programskom paketu KISSsoft, kasnije je izvršena detalja analiza, te su izvučene bitne informacije o vratilu i dijagrami. Nakon toga je napisan kontrolni proračun za svaki od kritičnih presjeka na izlaznom vratilu. Zaključeno je da su svi faktori sigurnosti zadovoljeni, ali zbog vrlo malog faktora sigurnosti na presjeku D-D, izvršen je još kontrolni proračun zamora materijala. Utvrđeno je da faktor sigurnosti za zamor materijala također zadovoljava.
Abstract (english)
In this paper, the output shaft of the two-stage reducer in the KISSsoft software package was first contoured, later a detailed analysis was performed, and important information about the shaft and diagrams was extracted. A control calculation was then written for each of the critical cross sections on the output shaft. It was concluded that all safety factors were satisfied, but due to the very small safety factor at the cross section D-D, a control fatigue calculation of the material was performed. The safety factor for material fatigue was also found to be satisfactory.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:150679
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-20 07:37:32