prikaz prve stranice dokumenta Povećanje snage dizelskog motora
Access restricted to students and staff of home institution
undergraduate thesis
Povećanje snage dizelskog motora
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:530125
Čanić, Tomislav
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Marine Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Čanić, T. (2021). Povećanje snage dizelskog motora (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:530125

Čanić, Tomislav. "Povećanje snage dizelskog motora." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:530125

Čanić, Tomislav. "Povećanje snage dizelskog motora." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:530125

Čanić, T. (2021). 'Povećanje snage dizelskog motora', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 11 January 2025, https://urn.nsk.hr/urn:nbn:hr:190:530125

Čanić T. Povećanje snage dizelskog motora [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2025 January 11] Available at: https://urn.nsk.hr/urn:nbn:hr:190:530125

T. Čanić, "Povećanje snage dizelskog motora", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:530125

Metadata
TitlePovećanje snage dizelskog motora
Title (english)Power increase of a diesel engine
AuthorTomislav Čanić
MentorTomislav Senčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberTomislav Senčić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Marine Engineering)
Rijeka
Defense date and country2021-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom se radu orijentiralo na pogled povećanja snage pomoću prednabijanja turbouhalom uz termodinamičke proračune i simulacije u programu. Prvo, krenulo se kroz termodinamičke proračune gdje je prednost imao proračun bez prednabijanja i svaki se korak detaljno računao. Poslije toga išao je proračun sa prednabijanjem u kojemu smo vidjeli za koliko se snaga povećala mijenjajući pojedine parametre. Tijekom proračuna vodila se briga i o ostalim vrijednostima osim snage, momenta, toplinskih tokova, specifične potrošnje goriva, protoka zraka i drugih. Nakon teoretskog dijela prešli smo u program koji provodi simulacije. U njemu smo isto kao i gore provodili dvije odvojene simulacije. Prilikom očitavanja rezultata simulacije odmah se uspoređivalo sa vrijednostima dobivenim u proračunu te njihova odstupanja. Na kraju su se uspoređivali prednosti i nedostatci prednabijanja turbopuhalom i došlo je do zaključka kako turbopuhalo ima veliku korist na motoru sa unutarnjim izgaranjem.
Abstract (english)
This paper focuses on viewing the increasing power by pre-charge turbocharger with thermodynamic calculations and simulations in the program. First, it went through thermodynamic calculations where the advantage had a calculation without pre-impaling and each step was counted in detail. After that went the calculation with pre-impaling in which we saw by how much power increased by changing individual parameters. During the calculation, other values were also taken into consideration other than power, torque, heat flows, specific fuel consumption, airflow, and others. After the theoretical part, we moved on to a program that performs simulations. In it, we conducted two separate simulations. When reading the results of the simulation, it was immediately compared with the values obtained in the calculation and their deviations. In the end, the advantages and disadvantages of turbocharged pre-charge were compared, and it concluded that turbocharged has greater benefit on the internal combustion engine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:530125
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-20 09:41:27