prikaz prve stranice dokumenta Projektiranje škara za rezanje materijala u valjaonici čelika
Access restricted to students and staff of home institution
master's thesis
Projektiranje škara za rezanje materijala u valjaonici čelika
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:740701
Shahini, Filip
University of Rijeka
Faculty of Engineering
Department of Automation and Electronics
Section of Electronics, Robotics and Automation

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Shahini, F. (2021). Projektiranje škara za rezanje materijala u valjaonici čelika (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:740701

Shahini, Filip. "Projektiranje škara za rezanje materijala u valjaonici čelika." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:740701

Shahini, Filip. "Projektiranje škara za rezanje materijala u valjaonici čelika." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:740701

Shahini, F. (2021). 'Projektiranje škara za rezanje materijala u valjaonici čelika', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 05 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:740701

Shahini F. Projektiranje škara za rezanje materijala u valjaonici čelika [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 May 05] Available at: https://urn.nsk.hr/urn:nbn:hr:190:740701

F. Shahini, "Projektiranje škara za rezanje materijala u valjaonici čelika", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:740701

Metadata
TitleProjektiranje škara za rezanje materijala u valjaonici čelika
Title (english)Steel bar shear design in rolling mill
AuthorFilip Shahini
MentorDario Matika (mentor)
Committee memberViktor Sučić (predsjednik povjerenstva)
Committee memberDario Matika (član povjerenstva)
Committee memberZlatan Car (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Automation and Electronics)
(Section of Electronics, Robotics and Automation)
Rijeka
Defense date and country2021-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom diplomskog radu dano je realno projektno rješenje škara za rezanje glave i repa u valjaonici čelika. Primarna svrha škara je rezanje glave i repa materijala koji trpe najveća mehanička opterećenja prilikom valjanja. Sekundarna svrha je sjeckanje čeličnog materijala u slučaju problema u liniji valjanja. Sustav upravljanja škarama sastoji se od Siemensovo PLC-a, ABB frekventnog pretvarača te senzora i aktuatora. Napravljen je demonstracijski model s Siemensovim PLC-om, ABB frekventnim pretvaračem, simuliranim enkoder te induktivnim senzorom križanja noževa BX. Kontrola demonstracijskog modela vrši se putem upravljačke jedinice s ekranom osjetljivim na dodir (HMI).
Abstract (english)
This master thesis presents realistic project solution of head - tail crank/flying shear in rolling mill facility. The main mission is materials head and tail cut which suffer from hard mechanical load during material rolling. Addition mission is steel material chopping in case of problems in the rolling line. Shear's control system is consisted of Siemens's PLC, ABB's variable frequency drive and variuos sensors and acutators. A demonstration model has been made with Siemens PLC, ABB variable frequency drive, simulated encoder and blade cross inductive sensor. The contol of the demonstation model is done from control point with Human Machine Interface touch panel.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:740701
Study programmeTitle: Graduate University Study of Electrical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-27 09:54:50