prikaz prve stranice dokumenta Numerička analiza i optimizacija modela koronarnog stenta
Access restricted to students and staff of home institution
master's thesis
Numerička analiza i optimizacija modela koronarnog stenta
Rijeka: University of Rijeka, Faculty of Engineering, 2021. urn:nbn:hr:190:762060
Vrtovšnik, Domagoj
University of Rijeka
Faculty of Engineering
Department of Engineering Mechanics
Section of Structural Analysis

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Vrtovšnik, D. (2021). Numerička analiza i optimizacija modela koronarnog stenta (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:762060

Vrtovšnik, Domagoj. "Numerička analiza i optimizacija modela koronarnog stenta." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:762060

Vrtovšnik, Domagoj. "Numerička analiza i optimizacija modela koronarnog stenta." Master's thesis, University of Rijeka, Faculty of Engineering, 2021. https://urn.nsk.hr/urn:nbn:hr:190:762060

Vrtovšnik, D. (2021). 'Numerička analiza i optimizacija modela koronarnog stenta', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 01 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:762060

Vrtovšnik D. Numerička analiza i optimizacija modela koronarnog stenta [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2021 [cited 2024 November 01] Available at: https://urn.nsk.hr/urn:nbn:hr:190:762060

D. Vrtovšnik, "Numerička analiza i optimizacija modela koronarnog stenta", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:190:762060

Metadata
TitleNumerička analiza i optimizacija modela koronarnog stenta
Title (english)Numerical analysis and optimization of coronary stent model
AuthorDomagoj Vrtovšnik
MentorMarino Brčić (mentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberMarino Brčić (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberPaolo Blecich (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Engineering Mechanics)
(Section of Structural Analysis)
Rijeka
Defense date and country2021-03-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog diplomskog rada je numerička analiza i optimizacija geometrije koronarnog stenta za zadani materijal u radnim uvjetima. Rad kroz deset poglavlja objašnjava medicinsku pozadinu problema, bavi se teorijskim razmatranjima vezanima uz mehaniku čvrstog tijela te na kraju opisuje postupak modeliranja geometrije koronarnog stenta, njegovu analizu te optimizaciju geometrije. Dvije početne geometrije, nastale po uzoru na stvarne geometrije koronarnih stentova kreirane su pomoću programa za 3D modeliranje SolidWorks. Nakon toga, izdvojen je simetričan segment geometrije koji se uvozi u programski paket ABAQUS u kojem je odrađena numerička analiza metodom konačnih elemenata. Za obje inicijalne geometrije provedena je analiza naprezanja, a postupkom optimizacije oblika presjeka dobivene su konture optimalne geometrije. Optimalna geometrija za oba stenta modelirana je u SolidWorks-u te su rezultati provjereni ponovnim postupkom numeričke analize, ovaj puta za optimiziranu geometriju.
Abstract (english)
The goal of this thesis is numerical analysis and structural optimization of the coronary stent for given material in working conditions. Through its ten chapters, paper gives the medical background of the problem, explains theoretical considerations related to solid state mechanics and describes the procedure of modeling, finite element analysis and structural optimization of the coronary stent geometry. Two of the initial geometries were modeled on the existing stent geometries and created in the 3D modeling software SolidWorks. Then, the symmetrical segment of the geometry was singled out and imported in ABAQUS for the FEM analysis. Stress analysis was conducted for both initial geometries and the contours of optimal geometry were obtained through te process of shape optimization. Optimized geometry for both stents was also modeled in SolidWorks. In the end, simulation was repeated, but this time for the optimized geometry.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:762060
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-01-12 08:17:39