prikaz prve stranice dokumenta Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake
Access restricted to students and staff of home institution
master's thesis
Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:456884
Plantak, Niko
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction and Precision Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Plantak, N. (2022). Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:456884

Plantak, Niko. "Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:456884

Plantak, Niko. "Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:456884

Plantak, N. (2022). 'Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:456884

Plantak N. Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:456884

N. Plantak, "Konstrukcija uređaja s opružnim sustavom za rehabilitaciju šake", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:456884

Metadata
TitleKonstrukcija uređaja s opružnim sustavom za rehabilitaciju šake
Title (english)Mechanical engineering design of a spring-based hand rehabilitation device
AuthorNiko Plantak
MentorSaša Zelenika (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberSaša Zelenika (član povjerenstva)
Committee memberIgor Wolf (član povjerenstva)
Committee memberVedran Mrzljak (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction and Precision Engineering)
Rijeka
Defense date and country2022-05-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U okviru ovog diplomskog rada opisana je anatomija ljudske šake relevantna za konstrukciju uređaja s opružnim sustavom za rehabilitaciju šake. Dani su geometrijski, kinematički i dinamički zahtjevi. Opisani su modaliteti rehabilitacije i zahtjevi koji iz njih proizlaze. Dan je pregled postojećih rješenja sličnih sustava. Zahtjevi su razjašnjeni i postavljeni su prioriteti u odnosu na zadovoljavanje tih zahtjeva kako bi se moglo pristupiti koncipiranju i vrednovanju koncepata. Predloženo je četiri koncepcijskih rješenja na temelju zahtjeva i znanja prikupljenih pri istraživanju postojećih zahtjeva. Izabran je koncept temeljen na legurama s pamćenjem oblika. Dodatno su razjašnjeni zahtjevi kako bi se ustanovio optimalan pristup konstrukciji. Temeljeno na inovativnom rješenju, proračunati su i konstruirani aktuatori koji zadovoljavaju zahtjeve. Konstruiran je ostatak sustava za prijenos sila, momenata i kretanja, kao i sustav pričvršćivanja uređaja na šaku. Opisano je inovativno rješenje upravljanja SMA aktuatora. Opisani su suplementarni sustavi za prikupljanje povratnih informacija za upravljanje uređajem.
Abstract (english)
In this thesis the anatomy of the human hand, relevant for the design process of a spring-based hand rehabilitation device. The geometric, kinematic, and dynamic criteria are given. Rehabilitation modalities are described, as are the criteria resulting from those. A brief summary of existing similar solutions is given. The posed criteria are clarified and priorities regarding the fulfilment of these are given in order to proceed to the design proposal and evaluation stage. Four distinctive designs are proposed based upon the criteria, as well as the knowledge gathered while researching the topic. The concept based on shape memory alloys is selected. The criteria is additionally considered and clarified in order to ascertain the optimal approach to the mechanical engineering design. Based on a novel concept, actuators which meet the criteria are calculated and designed. The rest of the force, torque and movement systems is designed, as is the system responsible for attaching the device to the hand. A novel concept for SMA actuator control is described. The supplementary systems for additional feedback data gathering required for device control is described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:456884
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-06-07 09:10:20