prikaz prve stranice dokumenta CAM programiranje
Access restricted to students and staff of home institution
undergraduate thesis
CAM programiranje
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:030318
Brala, Teo
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Equipment and Robotics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Brala, T. (2022). CAM programiranje (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:030318

Brala, Teo. "CAM programiranje." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:030318

Brala, Teo. "CAM programiranje." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:030318

Brala, T. (2022). 'CAM programiranje', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:030318

Brala T. CAM programiranje [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:030318

T. Brala, "CAM programiranje", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:030318

Metadata
TitleCAM programiranje
Title (english)CAM programming
AuthorTeo Brala
MentorZoran Jurković (mentor)
MentorMladen Perinić (komentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
Committee memberJonatan Lerga (član povjerenstva)
Committee memberSandro Doboviček (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Equipment and Robotics)
Rijeka
Defense date and country2022-05-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj završnog rada bio je izraditi samocentrirajuću napravu za bušenje primjenom CAM softvera. Prije same izvedbe bilo je potrebno proučiti i razraditi svu potrebnu dokumentaciju kao što su 3D model, radionički nacrti, operacijski listovi i popis alata. NC program je izrađen u softveru Mastercam, a postupak izrade obratka je izveden na glodalici Axile V4 s upravljačkom jedinicom Heidenhain i sučeljem TNC640.
Abstract (english)
Goal of the final work was to make a self-centering dowel jig using CAM software. Prior to the implementation, it was necessary to study and develop all the necessary documentation such as a 3D model, workshop drawings, operating sheets and a list of tools. The NC program was created in the Mastercam software and the workpiece production process was performed on an Axile V4 milling machine with Heidenhain control unit and TNC640 interface.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:030318
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-06-07 09:46:20