prikaz prve stranice dokumenta Izrada geometrije predprivodećih i privodećih lopatice vodne turbine
  Download
PDF 5.01 MB
undergraduate thesis
Izrada geometrije predprivodećih i privodećih lopatice vodne turbine
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:420896
Potnar, Luka
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Potnar, L. (2022). Izrada geometrije predprivodećih i privodećih lopatice vodne turbine (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:420896

Potnar, Luka. "Izrada geometrije predprivodećih i privodećih lopatice vodne turbine." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:420896

Potnar, Luka. "Izrada geometrije predprivodećih i privodećih lopatice vodne turbine." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:420896

Potnar, L. (2022). 'Izrada geometrije predprivodećih i privodećih lopatice vodne turbine', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 26 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:420896

Potnar L. Izrada geometrije predprivodećih i privodećih lopatice vodne turbine [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 July 26] Available at: https://urn.nsk.hr/urn:nbn:hr:190:420896

L. Potnar, "Izrada geometrije predprivodećih i privodećih lopatice vodne turbine", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:420896

Metadata
TitleIzrada geometrije predprivodećih i privodećih lopatice vodne turbine
Title (english)Stay ring and wicked gate vanes geometry creation
AuthorLuka Potnar
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2022-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu prikazana je povijest vodnih turbina i vodenih kola. Također su navedeni najpoznatiji, ali i najzaslužniji fizičari i inženjeri za razvoj modernih vodnih turbina. Navedeni su razni softwarei koji omogućuju jednostavno 3D modeliranje kao što su Autodesk AutoCAD i Autodesk Inventor koji su korišteni za izradu ovog rada. Nakon toga, objašnjeno je 3D modeliranje lopatica vodne turbine po koracima. Krenuvši od privodećih lopatica, tj. modeliranje jedne, do modeliranja svih 24 lopatica. Iza toga pojašnjeno je modeliranje predprivodećih lopatica koje su modelirane na nešto drugačiji način od privodećih. Na kraju je objašnjeno oduzimanje predprivodećih lopatica od novog tijela što je kreiralo dio koji služi za izradu CFD simulacije.
Abstract (english)
This paper talks about history of water turbines and water wheels. Also there are some of the most known, and the most deserving physicist and engineers for development of modern water turbines. Then are listed softwares that are the most used in 3D modeling, such as Autodesk AutoCAD and Autodesk Inventor which are used for making this project. After that 3D modeling of turbine blades is explained by steps. Starting from leading blades, i.e. modeling one, to making a model of all 24 blades. Then it's explained modeling of pre-leading blades which were being modelled in a different way than the leading blades. In the end what was explained was subtracting pre-leading blades off a new solid which created a body which is used for making a CFD simulation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:420896
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-07-12 09:20:43