prikaz prve stranice dokumenta Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike
  Download
PDF 9.54 MB
master's thesis
Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:856905
Ortner, Patrik
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Ortner, P. (2022). Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:856905

Ortner, Patrik. "Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:856905

Ortner, Patrik. "Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:856905

Ortner, P. (2022). 'Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:856905

Ortner P. Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:856905

P. Ortner, "Eksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:856905

Metadata
TitleEksperimentalna analiza konzolno opterećenog nosivog elementa metodom korelacije digitalne slike
Title (english)Digital image correlation-based experimental analysis of cantilever specimen
AuthorPatrik Ortner
MentorRobert Basan (mentor)
MentorTea Marohnić (komentor)
MBZ: 318312
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberRobert Basan (član povjerenstva)
Committee memberTomislav Mrakovčić (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
Rijeka
Defense date and country2022-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Diplomski rad bavi se tematikom konstrukcije i analize ispitnih uzoraka sa i bez koncentratora naprezanja. Analiza ispitnih uzoraka provedena je analitičkom i numeričkom metodom te primjenom metode korelacije digitalne slike. Prije početka analize uzoraka eksperimentalno je određena vrijednost modula elastičnosti materijala izrade uzoraka – ABS. Analitički dio analize sastoji se od izračuna deformacije, naprezanja i progiba uzoraka pri čemu je progib izračunat samo za uzorak bez koncentratora naprezanja. Analiza numeričkom metodom sastoji se od izrade pojednostavljenog modela konzolno opterećenog uzorka te definiranja rubnih uvjeta u programskom paketu Autodesk Inventor. Numeričkom metodom dobivene su vrijednosti naprezanja, deformacije i progiba uzoraka. Rezultati analitičke i numeričke analize provjereni su primjenom metode korelacije digitalne slike tako što su se uzorci konzolno ukliještili na za to predviđenu napravu te su se opteretili utegom od 5 kg. U konačnici je napravljena analiza i usporedba rezultata dobivenih navedenim metodama.
Abstract (english)
The thesis deals with the topic of construction and analysis of test specimens with and without stress concentrators. The analysis of test samples was performed by analytical and numerical methods and by applying the digital image correlation method. Before starting the analysis of the samples, the value of the modulus of elasticity of the material of the samples - ABS was experimentally determined. The analytical part of the analysis consists of the calculation of deformation, stress and deflection of the samples, where the deflection is calculated only for the sample without the stress concentrator. Numerical analysis consists of creating a simplified model of a cantilever-loaded sample and defining boundary conditions in the Autodesk Inventor software. Using the numerical method, the values of stress, strain and deflection of the samples were obtained. The results of the analytical and numerical analysis were verified by applying the digital image correlation method by clamping the specimens cantilevered on a device designed for this purpose and loading them with a weight of 5 kg. Finally, the results obtained using the aforementioned methods were analysed and compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:856905
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-07-13 12:30:14