prikaz prve stranice dokumenta Projekt tehnološkog procesa vratila reduktora
  Download
PDF 10.58 MB
master's thesis
Projekt tehnološkog procesa vratila reduktora
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:834109
Toth, Matija
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Toth, M. (2022). Projekt tehnološkog procesa vratila reduktora (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:834109

Toth, Matija. "Projekt tehnološkog procesa vratila reduktora." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:834109

Toth, Matija. "Projekt tehnološkog procesa vratila reduktora." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:834109

Toth, M. (2022). 'Projekt tehnološkog procesa vratila reduktora', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:834109

Toth M. Projekt tehnološkog procesa vratila reduktora [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:834109

M. Toth, "Projekt tehnološkog procesa vratila reduktora", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:834109

Metadata
TitleProjekt tehnološkog procesa vratila reduktora
Title (english)Process planning of the reduction gear shaft
AuthorMatija Toth
MentorMladen Perinić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberIgor Wolf (član povjerenstva)
Committee memberMladen Perinić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Ovaj diplomski rad započet je u prosincu 2021. godine te je pisan do travnja 2022. godine. Rad je podijeljen na nekoliko, točnije 5 dijelova. U prvom dijelu opisana je analiza izratka, a u drugom dijelu analiza ulaznog materijala. Definiranje tehnološkog procesa u kojem je pojašnjen i kritični broj izradaka opisano je u trećem dijelu. Četvrti dio uključuje razradu tehnološkog procesa obuhvaćajući svih 6 operacija. U zadnjem, petom dijelu napravljena je simulacija procesa obrade u programu Mastercam. Svaki zahvat u radu detaljno je objašnjen te popraćen sa slikama.
Abstract (english)
This graduate work thesis was started in December 2021. and was written until April 2022. The work is divided into several, more precisely 5 parts. In the first part, the analysis of the workpiece is described and in the second part the analysis of the input material. The definition of the technological process in which the critical number of workpieces is clarified is described in the third part. The fourth part involves the elaboration of the technological process covering all 6 operations. In the last, fifth part, a simulation of the processing process in the Mastercam program was made. Each procedure in the paper is explained in detail and accompanied by images.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:834109
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-07-15 13:36:33