prikaz prve stranice dokumenta Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi
  Download
PDF 2.83 MB
undergraduate thesis
Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:410339
Cukon, Tone
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Fluid Mechanics and Hydraulic Machines

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Cukon, T. (2022). Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:410339

Cukon, Tone. "Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:410339

Cukon, Tone. "Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:410339

Cukon, T. (2022). 'Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:410339

Cukon T. Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:410339

T. Cukon, "Analiza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:410339

Metadata
TitleAnaliza strujanja kroz Darrieus vjetroturbinu s vertikalnom osi
AuthorTone Cukon
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberZoran Čarija (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Fluid Mechanics and Hydraulic Machines)
Rijeka
Defense date and country2022-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Fluid Mechanics
Abstract
Završni rad prikazuje stacionarnu analizu strujanja fluida Darrieusove vjetroturbine s vertikalnom osi H-tipa, koja se sastoji od tri, međusobno jednako razmaknute lopatice, upotrebom Ansys programa za provedbu računalnih simulacija. Promatrani problem je dvodimenzionalan budući da se promatra jedan presjek vjetroturbine po visini lopatica, odnosno okomito na os vrtnje. Analiza strujanja temelji se na izračunu koeficijenata uzgona pojedinih lopatica unutar kuta zakreta od početne pozicije od 0° do 180°, za svakih 10° rotacije. Kroz rad se prolazi kroz proces izrade geometrije, preko izrade numeričke mreže, do numeričke analize i prikaza rezultata, sve unutar pojedinih komponenti sustava Ansys Workbench aplikacije. Dobiveni rezultati vezani za vrijednosti koeficijenata uzgona na pojedinim lopaticama turbine pokazuju određene pravilnosti, međutim, nije do kraja potvrđena njihova valjanost. Konture statičkih i dinamičkih tlakova te konture brzine, za pojedine položaje, dobro opisuju strujanje fluida unutar pretpostavki stacionarnog strujanja.
Abstract (english)
This paper covers steady state numerical analysis of fluid flow on Darrieus H-type vertical axis wind turbine, with three equally spaced turbine blades, using Ansys simulation software. Observed problem is two-dimensional, where the geometry is derived from a cross-section perpendicular to the turbine axis of rotation. Fluid flow analysis consists of calculation of lift coefficients of each individual turbine blade for angle of attack in range 0°-180°, with 10° resolution data extraction. This work covers modeling geometry, through mesh creation, simulation setup and result processing, all by using system components of Ansys Workbench application. Produced results of lift coefficients, for each of the blade, show some regularity in structure but haven’t been validated. Results of contour of static and dynamic pressure and velocity magnitude contours give a good description of fluid flow within assumptions of steady state flow.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:410339
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-09-23 11:27:08