prikaz prve stranice dokumenta Postupak toplinske obrade strojnog dijela LD.22-ST.50
  Download
PDF 6.43 MB
undergraduate thesis
Postupak toplinske obrade strojnog dijela LD.22-ST.50
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:262989
Dabović, Leopold
University of Rijeka
Faculty of Engineering
Department of Materials Science and Engineering
Section of Materials Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Dabović, L. (2022). Postupak toplinske obrade strojnog dijela LD.22-ST.50 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:262989

Dabović, Leopold. "Postupak toplinske obrade strojnog dijela LD.22-ST.50." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:262989

Dabović, Leopold. "Postupak toplinske obrade strojnog dijela LD.22-ST.50." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:262989

Dabović, L. (2022). 'Postupak toplinske obrade strojnog dijela LD.22-ST.50', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 28 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:262989

Dabović L. Postupak toplinske obrade strojnog dijela LD.22-ST.50 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 July 28] Available at: https://urn.nsk.hr/urn:nbn:hr:190:262989

L. Dabović, "Postupak toplinske obrade strojnog dijela LD.22-ST.50", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:262989

Metadata
TitlePostupak toplinske obrade strojnog dijela LD.22-ST.50
Title (english)Heat treating process of workpiece LD.22-ST.50
AuthorLeopold Dabović
MentorDario Iljkić (mentor)
MentorMatej Fonović (komentor)
Committee memberRobert Basan (predsjednik povjerenstva)
Committee memberDuško Pavletić (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
Committee memberSandro Doboviček (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Materials Science and Engineering)
(Section of Materials Engineering)
Rijeka
Defense date and country2022-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom radu je opisan postupak poboljšavanja strojnog dijela LD.22-ST.50. Opisani su postupci kaljenja i popuštanja, te hlađenja u vodi. Strojni dio je kaljen na temperaturi od 840 °C i nakon toga gašen u vodi. Zatim je podvrgnut postupku visokotemperaturnog popuštanja pri temperaturi od 600 °C, a nakon toga ohlađen u vodi. Nakon postupka poboljšavanja, izmjerena je tvrdoća strojnog dijela od 27 HRC. Usporedbom dobivenog rezultata mjerenja, zaključeno je da dobivena tvrdoća strojnog dijela nakon postupka poboljšavanja zadovoljava prethodno postavljeni zahtjev.
Abstract (english)
In this thesis is described the process of heat treatment the workpiece LD.22-ST.50. The processes of quenching and tempering, and cooling in water are described. The workpiece was heated at a temperature of 840 °C and then quenched in water. After that the workpiece is subjected to a high-temperature stress relieving process at a temperature of 600 °C, and then cooled in water. After the heat treating process, the measured hardness of the workpiece was 27 HRC. By comparing the obtained measurement result, it was concluded that the obtained hardness of the workpiece after the procedure satisfies the previously set requirement.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:262989
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-09-24 08:21:57