prikaz prve stranice dokumenta ISPITIVANJE STROJNOG DIJELA MS.20-DI.41
  Download
PDF 44.6 MB
master's thesis
ISPITIVANJE STROJNOG DIJELA MS.20-DI.41
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:629796
Sviben, Mihael
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Sviben, M. (2022). ISPITIVANJE STROJNOG DIJELA MS.20-DI.41 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:629796

Sviben, Mihael. "ISPITIVANJE STROJNOG DIJELA MS.20-DI.41." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:629796

Sviben, Mihael. "ISPITIVANJE STROJNOG DIJELA MS.20-DI.41." Master's thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:629796

Sviben, M. (2022). 'ISPITIVANJE STROJNOG DIJELA MS.20-DI.41', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:629796

Sviben M. ISPITIVANJE STROJNOG DIJELA MS.20-DI.41 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:629796

M. Sviben, "ISPITIVANJE STROJNOG DIJELA MS.20-DI.41", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:629796

Metadata
TitleISPITIVANJE STROJNOG DIJELA MS.20-DI.41
AuthorMihael Sviben
MentorSunčana Smokvina Hanza (mentor)
Committee memberTomislav Mrakovčić (predsjednik povjerenstva)
Committee memberLado Kranjčević (član povjerenstva)
Committee memberSunčana Smokvina Hanza (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2022, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Diplomski rad bavi se metodama ispitivanja bez razaranja. U radu su opisane neke od osnovnih i najčešće korištenih metoda ispitivanja bez razaranja. Opisane su i pogreške u zavarenim spojevima koje je moguće detektirati ispitivanjima bez razaranja. U praktičnom dijelu rada zadani strojni dio je ispitan sa dvije nezavisne metode ispitivanja bez razaranja. Zavar Z67C ispitan je radiografijom kao volumenskom metodom i penetrantima kao površinskom metodom. Analizom rezultata ispitivanja pronađene su manje nepravilnosti stoga je zavar ocjenjen prihvatljivim.
Abstract (english)
The thesis deals with non-destructive testing methods. Some of the basic and most commonly used non-destructive testing methods are described. Defects in welded joints that can be detected by non- destructive testing are also described. In the practical part of the thesis, the given machine part was tested with two independent non- destructive testing methods. Weld Z67C was tested by radiography as a volumetric testing method and by penetrants as a surface testing method. By analyzing the test results, the weld was rated as acceptable.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:629796
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-09-26 16:34:08