prikaz prve stranice dokumenta Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba
  Download
PDF 2.46 MB
master's thesis
Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:378204
Par, Filip
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Par, F. (2023). Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:378204

Par, Filip. "Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:378204

Par, Filip. "Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:378204

Par, F. (2023). 'Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:378204

Par F. Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:378204

F. Par, "Utjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:378204

Metadata
TitleUtjecaj tijela zupčanika na naprezanja u njegovom korijenu zuba
Title (english)The influence of the gear body on the stresses in his tooth root
AuthorFilip Par
MentorMarina Franulović (mentor)
Committee memberNeven Lovrin (predsjednik povjerenstva)
Committee memberMarina Franulović (član povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
Rijeka
Defense date and country2023-01-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu provedena je numerička analiza naprezanja i deformacija na vlačno opterećenoj strani gonjenog zupčanika za različite debljine vijenca. Prvi dio rada predstavlja teorijsku osnovu o zupčastim prijenosnicima, objašnjeno je naprezanje u korijenu zuba i na kraju je objašnjena metoda konačnih elemenata. U drugom dijelu rada diskretiziran je gonjeni zupčanik, te su nakon svega izvedeni analitički proračuni i numeričke analize za različite debljine vijenca gonjenog zupčanika. Izvedeno je ukupno 12 simulacija za 6 različitih konfiguracija gonjenog zupčanika. Usporedba rezultata analitičkog proračuna i numeričke analize otkrila je sličnosti za određene konfiguracije gonjenog zupčanika, dok u nekim slučajevima razlike su značajne. Na kraju je utvrđena optimalna debljina vijenca za minimalni faktor sigurnosti protiv loma u korijenu zuba.
Abstract (english)
In this study, a numerical analysis of stresses and deformations on the tensile side of the driven gear was performed for different rim thicknesses. The first part of thesis presents the theoretical basis of gear transmissions, the stress in the root of the tooth is also explained and finally the finite element method. In the second part of the thesis, the driven gear was discretized, and after all, analytical calculations and numerical analyzes were performed for different rim thicknesses of the driven gear. A total of 12 simulations were performed for 6 different driven gear configurations. A comparison of the results of the analytical calculation and the numerical analysis revealed similarities for certain configurations for the driven gear, while in some cases the differences are significant. In the end, the optimal rim thickness was determined for the minimum factor of safety against fracture in the root.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:378204
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-01-19 15:34:51