prikaz prve stranice dokumenta Ultrazvučno mjerenje protoka
  Download
PDF 1.25 MB
undergraduate thesis
Ultrazvučno mjerenje protoka
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:841625
Odović, Tin
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Odović, T. (2023). Ultrazvučno mjerenje protoka (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:841625

Odović, Tin. "Ultrazvučno mjerenje protoka." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:841625

Odović, Tin. "Ultrazvučno mjerenje protoka." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:841625

Odović, T. (2023). 'Ultrazvučno mjerenje protoka', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 06 May 2024, https://urn.nsk.hr/urn:nbn:hr:190:841625

Odović T. Ultrazvučno mjerenje protoka [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 May 06] Available at: https://urn.nsk.hr/urn:nbn:hr:190:841625

T. Odović, "Ultrazvučno mjerenje protoka", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:841625

Metadata
TitleUltrazvučno mjerenje protoka
Title (english)Ultrasonic flow measurement
AuthorTin Odović
MentorLado Kranjčević (mentor)
MentorOzren Bukovac (mentor)
Committee memberLado Kranjčević (predsjednik povjerenstva)
Committee memberSamir Žic (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
Rijeka
Defense date and country2023-05-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Za ovaj završni rad „Ultrazvučno mjerenje protoka“ zadatak je bio povrh svega odraditi eksperiment u zatvorenom krugu u laboratoriju na Tehničkom fakultetu u Rijeci. Prvi dio završnog rada bavi se objašnjavanjem mjerenja protoka te vrsta protoka i protokomjera. Nakon prvog dijela objašnjavamo vrste i način rada ultrazvučnih protokomjera. Spominjemo i pitotove cijevi i njihovu široku upotrebu. U eksperimentalnom dijelu mjerimo protok na ultrazvučnom protokomjeru i turbinskim mjeračima protoka za različite podešene količine protoka. Svi rezultati eksperimenta su zabilježeni u tablicama. Koristila se isključivo W metoda mjerenja protoka. Za kraj završnog rada napravljena je simulacija za dio zatvorenog kruga u programu AFT Fathom 9.
Abstract (english)
For this final thesis "Ultrasonic flow measurement", the task was, above all, to perform an experiment in a closed circuit in the laboratory at the Technical Faculty in Rijeka. The first part of the final paper deals with the explanation of flow measurement and types of flow and flowmeters. After the first part, we explain the types and mode of operation of ultrasonic flowmeters. We also mention pitot tubes and their wide use. In the experimental part, we measure the flow on an ultrasonic flowmeter and turbine flowmeters for different adjusted flow rates. All the results of the experiment are recorded in tables. Only the W flow measurement method was used. At the end of the final thesis, a simulation was made for a part of the closed circuit in the AFT Fathom 9 program.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:841625
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-05-12 11:54:24