prikaz prve stranice dokumenta Primjena CAD/CAM u razvoju novog proizvoda
  Download
PDF 10.36 MB
master's thesis
Primjena CAD/CAM u razvoju novog proizvoda
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:321990
Plahutar, Dario
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Plahutar, D. (2023). Primjena CAD/CAM u razvoju novog proizvoda (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:321990

Plahutar, Dario. "Primjena CAD/CAM u razvoju novog proizvoda." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:321990

Plahutar, Dario. "Primjena CAD/CAM u razvoju novog proizvoda." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:321990

Plahutar, D. (2023). 'Primjena CAD/CAM u razvoju novog proizvoda', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:321990

Plahutar D. Primjena CAD/CAM u razvoju novog proizvoda [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:321990

D. Plahutar, "Primjena CAD/CAM u razvoju novog proizvoda", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:321990

Metadata
TitlePrimjena CAD/CAM u razvoju novog proizvoda
Title (english)CAD/CAM application in new product development
AuthorDario Plahutar
MentorZoran Jurković (mentor)
MentorRobert Basan (komentor)
Committee memberIgor Bonefačić (predsjednik povjerenstva)
Committee memberMarko Čanađija (član povjerenstva)
Committee memberZoran Jurković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2023-07-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu, izrađena je dekorativna stolna svjetiljka s gravurama grba Tehničkog fakulteta Sveučilišta u Rijeci. Početak rada se sastoji od uvoda gdje se ukratko opisuje povijest svjetlosti i osnovni parametri koji se koriste kod rasvjete. Nadalje, pristupilo se konstruiranju svjetiljke gdje se izrađuje CAD model svjetiljke i njenog prototipa. Prema CAD modelima razrađuju se radionički i sklopni crteži. Prototip se izradio FDM procesom 3D printanja od PLA materijala. Nakon završetka printanja, sastavlja se i ispituje prototip. Nadalje slijedi izrada svjetiljke uz pomoć CAM programa. Po završetku strojne obrade dijelovi se površinski obrađuju: brušenjem, cinčanjem, kromatiranjem i na kraju plastificiranjem. Izrada diplomskog rada završava sastavljanjem svjetiljke.
Abstract (english)
In this master's thesis, a decorative table lamp with engravings of the coat of arms of the Technical Faculty of the University of Rijeka was made. The beginning of the work consists of an introduction, which briefly describes the history of light and the basic parameters used in lighting. Furthermore, the design of the lamp was started, where a CAD model of the lamp and its prototype is created. Workshop and assembly drawings are developed according to CAD models. The prototype was made by the FDM process of 3D printing from PLA material. After the printing is finished, the prototype is assembled and tested. Next comes the creation of the lamp with the help of the CAM program. At the end of machining, the parts are surface-treated: grinding, galvanizing, chromating and finally plasticizing. The creation of the master's thesis ends with the assembly of the lamp.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:321990
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-07-11 23:09:24