prikaz prve stranice dokumenta Projekt tehnološkog procesa ležajne prirubnice
  Download
PDF 2.89 MB
undergraduate thesis
Projekt tehnološkog procesa ležajne prirubnice
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:025228
Ištoković, Daniel
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Process Planning

Linked objects
Nacrt ležajne prirubnice | Appendix

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Ištoković, D. (2023). Projekt tehnološkog procesa ležajne prirubnice (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:025228

Ištoković, Daniel. "Projekt tehnološkog procesa ležajne prirubnice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:025228

Ištoković, Daniel. "Projekt tehnološkog procesa ležajne prirubnice." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:025228

Ištoković, D. (2023). 'Projekt tehnološkog procesa ležajne prirubnice', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 30 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:025228

Ištoković D. Projekt tehnološkog procesa ležajne prirubnice [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 July 30] Available at: https://urn.nsk.hr/urn:nbn:hr:190:025228

D. Ištoković, "Projekt tehnološkog procesa ležajne prirubnice", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:025228

Metadata
TitleProjekt tehnološkog procesa ležajne prirubnice
AuthorDaniel Ištoković
MentorMladen Perinić (mentor)
Committee memberSamir Žic (predsjednik povjerenstva)
Committee memberMladen Perinić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Process Planning)
Rijeka
Defense date and country2023-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U okviru ovog završnom radu prikazana je izrada tehnološkog procesa ležajne prirubnice prema nacrtu za količinu od 15000 komada godišnje. Rad obuhvaća nekoliko poglavlja u kojima su detaljno objašnjene faze izrade koje se međusobno nadovezuju jedna na drugu. Tehnološki proces započinje tehnološkom analizom s konstrukcijskog i tehnološkog stajališta. Zatim slijedi odabir oblika ulaznog materijala, a u ovom radu je odabran otkivak. Potom se određuje struktura tehnološkog procesa definiranjem rasporeda operacija i radnih mjesta na kojima će se iste odvijati. Nakon toga se napravila razrada svake operacije koja obuhvaća najsitnije detalje poput propisivanja režima rada, strojeva i alata koje je potrebno koristiti. Slijedi računanje ekonomske i proizvodne brzine rezanja za jedan zahvat grube i jedan zahvat fine obrade. Za kraj je izrada tehnološke dokumentacije na temelju dobivenih rezultata tijekom projektiranja tehnološkog procesa.
Abstract (english)
In this paper, the production of the technological process of the bearing flange according to the design for a quantity of 15,000 pieces per year is presented. The work includes several chapters in which the stages of production are explained in details, which build on each other. The technological process begins with a technological analysis from a structural and technological point of view. Then follows the selection of the form of the input material, and in this work, forging was chosen. Then the structure of the technological process is determined by defining the schedule of operations and workplaces where they will take place. After that, an elaboration of each operation was made, which includes the smallest details, such as prescribing the work regime, machines and tools that need to be used. The following is a calculation of the economic and production speed of cutting for one operation of rough processing and one operation of fine processing. At the end is the production of technological documentation based on the results obtained during the design of the technological process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:025228
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) icon
Created on2023-09-12 16:34:10