prikaz prve stranice dokumenta Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5
  Download
PDF 3.17 MB
undergraduate thesis
Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:199167
Stojaković, Adrian
University of Rijeka
Faculty of Engineering
Department of Naval Architecture and Ocean Engineering
Section of Ship Design

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Stojaković, A. (2023). Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:199167

Stojaković, Adrian. "Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:199167

Stojaković, Adrian. "Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:199167

Stojaković, A. (2023). 'Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:199167

Stojaković A. Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:199167

A. Stojaković, "Snimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:199167

Metadata
TitleSnimanje forme fotogrametrijskom metodom i izrada nacrta 5-metarske jedrilice tipa L5
Title (english)Photogrammetry measuring and modeling of the L5 type sailboat hull
AuthorAdrian Stojaković
MentorAnton Turk (mentor)
MentorMarko Hadjina (komentor)
Committee memberRoko Dejhalla (predsjednik povjerenstva)
Committee memberAnton Turk (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Naval Architecture and Ocean Engineering)
(Section of Ship Design)
Rijeka
Defense date and country2023-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Shipbuilding
Hydromechanics of Floating and Maritime Structures
Abstract
U ovom radu zadatak je bio izraditi 3D model forme trupa u odgovarajućem softveru. Stvarni model predstavlja jedrilicu klase L5. Model jedrilice smješten je u Edukativnoj radionici Torpedo. Prvo se moralo obaviti planiranje na koji će se način izvršiti postupak izrade rada. Zatim se pristupilo označavanju trupa modela broda sa točkama za označavanje i na kraju slikao, prethodno označen model trupa broda, digitalnom kamerom. Te slike su se koristile u računalnom programu Photomodeleru za fotogrametriju radi dobivanja oblaka točaka po karakterističnim krivuljama. S tim oblakom nastavila se izrada u drugom računalnom programu Rhinocerosu kako bi se dobio 3D model forme trupa broda. U radu je još spomenuta razlika između klasične i suvremene metode snimanja forme i njihove prednosti i mane.
Abstract (english)
In this paper, the task was to create a 3D model of the hull form in the appropriate software. The actual model represents an L5 class sailboat. The sailboat model is located in the Torpedo Educational Workshop. First, planning had to be done in which way the process of creating the work would be carried out. Then, marking of the hull of the ship model with marking points was started, and at the end, the previously marked hull of the ship was photographed with a digital camera. These images were used in the computer program Photomodeler for photogrammetry in order to obtain cloud of points according to characteristic curves. With this cloud, the creation continued in another computer program, Rhinoceros, in order to obtain a 3D model of the shape of the ship's hull. The paper also mentions the difference between classical and modern methods of form recording and their advantages and disadvantages.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:199167
Study programmeTitle: Undergraduate University Study of Naval Architecture
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-09-12 17:03:11