prikaz prve stranice dokumenta Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel
  Download
PDF 2.7 MB
master's thesis
Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:834772
Loparić, Marina
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Loparić, M. (2023). Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:834772

Loparić, Marina. "Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:834772

Loparić, Marina. "Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:834772

Loparić, M. (2023). 'Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:834772

Loparić M. Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:834772

M. Loparić, "Računalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:834772

Metadata
TitleRačunalno modeliranje i simulacija rada kombinirane elektrane snage 36,5 MWel
Title (english)Computational Modeling and Simulation of a 36,5 MWel Combined Cycle Power Plant
AuthorMarina Loparić
MentorVladimir Glažar (mentor)
MentorBoris Delač (komentor)
Committee memberIgor Bonefačić (predsjednik povjerenstva)
Committee memberIgor Wolf (član povjerenstva)
Committee memberPaolo Blecich (član povjerenstva)
Committee memberVladimir Glažar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2023, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisan je princip rada kombiniranog plinsko-parnog postrojenja te izrada računalnih simulacija kombiniranog postrojenja koje se sastoji od jednog plinskog turbinskog postrojenja i parno turbinskog postrojenja s dvotlačnim utilizatorom. Ukupna zadana snaga postrojenja je 36,5 MWel, od kojih se 25 MWel proizvodi na plinskom dijelu, a preostalih 11,5 MWel na parnom dijelu postrojenja. U sklopu rada provedena je analiza u dva računalna programa; EBSILON Professional i TRNSYS. Svaki program je kratko opisan te se detaljno opisala izrada simulacije za svaki dio postrojenja. U radu su priloženi dijagrami dobiveni u programima. Također je obuhvaćen i analitički proračun, po kojem su uspoređivani podaci dobiveni računskim putem. Za kraj se provela eksergetska i energetska analiza za različite parametre rada.
Abstract (english)
This master thesis describes the operating principle and computational simulation of a combined cycle power plant consisting of a gas turbine power plant and a steam turbine power plant with a dual pressure heat recovery steam generator (HRSG). The total specified capacity of the plant is 36.5 MWel, with 25 MWel generated in the gas part and the remaining 11.5 MWel in the steam part of the plant. As part of this study, an analysis was performed using two software programs: EBSILON Professional and TRNSYS. Each program is briefly introduced, followed by a detailed description of the simulation setup for each plant section. The diagrams created with the software programs are included in this paper. In addition, an analytical calculation was performed to allow a comparison between the calculation data and the results obtained with the analytical approach. Finally, an exergy and energy analysis was performed for different operating parameters.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:834772
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-09-12 17:28:12