prikaz prve stranice dokumenta Modeliranje pozicija proizvoda korištenjem sheet metal funkcija
  Download
PDF 3.53 MB
master's thesis
Modeliranje pozicija proizvoda korištenjem sheet metal funkcija
Rijeka: University of Rijeka, Faculty of Engineering, 2023. urn:nbn:hr:190:719236
Bedžeti, Sandra
University of Rijeka
Faculty of Engineering
Department of Industrial Engineering and Management
Section of Production Technologies

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Bedžeti, S. (2023). Modeliranje pozicija proizvoda korištenjem sheet metal funkcija (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:719236

Bedžeti, Sandra. "Modeliranje pozicija proizvoda korištenjem sheet metal funkcija." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:719236

Bedžeti, Sandra. "Modeliranje pozicija proizvoda korištenjem sheet metal funkcija." Master's thesis, University of Rijeka, Faculty of Engineering, 2023. https://urn.nsk.hr/urn:nbn:hr:190:719236

Bedžeti, S. (2023). 'Modeliranje pozicija proizvoda korištenjem sheet metal funkcija', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 04 October 2024, https://urn.nsk.hr/urn:nbn:hr:190:719236

Bedžeti S. Modeliranje pozicija proizvoda korištenjem sheet metal funkcija [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2023 [cited 2024 October 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:719236

S. Bedžeti, "Modeliranje pozicija proizvoda korištenjem sheet metal funkcija", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:190:719236

Metadata
TitleModeliranje pozicija proizvoda korištenjem sheet metal funkcija
Title (english)Modeling product positions using sheet metal functions
AuthorSandra Bedžeti
MentorGraciela Šterpin Valić (mentor)
MentorGoran Cukor (komentor)
Committee memberGoran Cukor (predsjednik povjerenstva)
Committee memberGraciela Šterpin Valić (član povjerenstva)
Committee memberDavid Ištoković (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Industrial Engineering and Management)
(Section of Production Technologies)
Rijeka
Defense date and country2023-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Zadatak je ovog diplomskog rada "Modeliranje pozicija proizvoda korištenjem sheet metal funkcija". Upotreba CAD/CAM programa značajno je smanjila vrijeme potrebno za konstruiranje proizvoda, izradu potrebne dokumentacije, optimizaciju strojeva i izradu CNC programa. U prvom dijelu rada ukratko su opisane fizikalne osnove oblikovanja limova deformiranjem, navedena je podjela postupaka oblikovanja limova na duboko vučenje, obradu odvajanjem (rezanje škarama, prosijecanje i probijanje) i savijanje te je dan kratki opis svakog postupka. U nastavku je započeto modeliranje pozicija prema projektu te su opisana dva principa modeliranja - odozdo prema gore i odozgo prema dole. Izabrani materijal za izradu pozicija je austenitni nehrđajući čelik X5CrNi18-10. Zatim slijedi opis postupaka 3D modeliranja pozicija i izrada sklopova u programu Autodesk Inventor. Postupci izrade modeliranih pozicija, odnosno gniježđenje, rezanje laserom i izrada CNC programa za savijanje te njihovo sklapanje opisano je u zadnjem dijelu rada.
Abstract (english)
The task of this thesis is "Modeling product positions using sheet metal functions". The use of CAD/CAM programs has significantly reduced the time required for designing products, creating the necessary documentation, optimizing machines and creating CNC programs. The first part of the paper briefly describes the physical bases of sheet metal forming, then is stated the division of sheet metal forming processes into deep drawing, cutting (shearing, blanking and punching) and bending, and a brief description of each process. In the following is started with modeling of the parts according to the project, and description of two modeling principles - bottom-up and top-down. Material chosen for production of the parts is austenitic stainless steel X5CrNi18-10. This is followed by a description of the procedures for 3D modeling of the parts and creating assembly in Autodesk Inventor program. Last part of the paper describes the procedures for creating modeled positions, i.e. nesting, laser cutting and creating a CNC program for bending, and their assembly.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:719236
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-09-14 06:48:49