prikaz prve stranice dokumenta Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka
  Download
PDF 3.23 MB
master's thesis
Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka
Rijeka: University of Rijeka, Faculty of Engineering, 2024. urn:nbn:hr:190:053380
Benazić, Masimo
University of Rijeka
Faculty of Engineering
Department of Fluid Mechanics and Computational Engineering
Section of Computational Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Benazić, M. (2024). Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:053380

Benazić, Masimo. "Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka." Master's thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:053380

Benazić, Masimo. "Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka." Master's thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:053380

Benazić, M. (2024). 'Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 04 October 2024, https://urn.nsk.hr/urn:nbn:hr:190:053380

Benazić M. Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2024 [cited 2024 October 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:053380

M. Benazić, "Eksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:190:053380

Metadata
TitleEksperimentalna i numerička analiza toplinski obrađenih 3D tiskanih uzoraka
Title (english)Experimental and numerical analisys of heat treated 3D printed samples
AuthorMasimo Benazić
MentorMarino Brčić (mentor)
Committee memberMarino Brčić (član povjerenstva)
Committee memberIgor Bonefačić (predsjednik povjerenstva)
Committee memberErvin Kamenar (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Fluid Mechanics and Computational Engineering)
(Section of Computational Engineering)
Rijeka
Defense date and country2024-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovome je radu opisan postupak eksperimentalne i numeričke analize termički obrađenih 3D tiskanih uzoraka metodom konačnih elemenata. Tehnologijom 3D ispisa ispisana su tri seta testnih uzoraka iz PLA i ABS materijala. Prvi set je korišten kao referentni uzorak, dok su druga dva seta termički obrađena na 60°C i 100°C. U sklopu eksperimentalne analize provedeni su vlačni test, test nisko-cikličkog zamora te test kratkotrajnog puzanja na svakom od tri seta za oba materijala. Podatci dobiveni iz navedenih testova korišteni su za postavljanje jednadžbi puzanja za svaki set uzoraka. Numerička analiza provedena u programu FEMAP temeljena je na eksperimentalno dobivenim jednadžbama puzanja, a provedena je kako bi se potvrdila točnost eksperimentalnih podataka te po potrebi moglo predvidjeti ponašanje materijala pri dužim periodima opterećenja.
Abstract (english)
This paper describes, the process of experimental and numerical analysis of heat treated 3D printed samples using the finite element method. Three sets of test samples made from PLA and ABS materials were printed using 3D printing technology. The first set was used as a reference sample, while the other two sets were heat treated at 60°C and 100°C. As part of the experimental analysis, tensile tests, low-cycle fatigue tests, and short-term creep tests were conducted on each of the three sets for both materials. The data obtained from these tests were used to establish creep equations for each set of samples. The numerical analysis carried out in the FEMAP software was based on the experimentally obtained creep equations and was conducted to confirm the accuracy of the experimental data and to predict the behavior of the materials under longer loading periods if necessary.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:053380
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-07-12 15:56:36