prikaz prve stranice dokumenta Numerička analiza konstrukcije modularnih uredskih kontejnera
  Download
PDF 6.64 MB
master's thesis
Numerička analiza konstrukcije modularnih uredskih kontejnera
Rijeka: University of Rijeka, Faculty of Engineering, 2024. urn:nbn:hr:190:186651
Golob, Petar
University of Rijeka
Faculty of Engineering
Department of Engineering Mechanics
Section of Solid Mechanics

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Golob, P. (2024). Numerička analiza konstrukcije modularnih uredskih kontejnera (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:186651

Golob, Petar. "Numerička analiza konstrukcije modularnih uredskih kontejnera." Master's thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:186651

Golob, Petar. "Numerička analiza konstrukcije modularnih uredskih kontejnera." Master's thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:186651

Golob, P. (2024). 'Numerička analiza konstrukcije modularnih uredskih kontejnera', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 04 October 2024, https://urn.nsk.hr/urn:nbn:hr:190:186651

Golob P. Numerička analiza konstrukcije modularnih uredskih kontejnera [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2024 [cited 2024 October 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:186651

P. Golob, "Numerička analiza konstrukcije modularnih uredskih kontejnera", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:190:186651

Metadata
TitleNumerička analiza konstrukcije modularnih uredskih kontejnera
Title (english)Numerical analysis of the modular office container structure
AuthorPetar Golob
MentorMarino Brčić (mentor)
Committee memberIgor Bonefačić (predsjednik povjerenstva)
Committee memberErvin Kamenar (član povjerenstva)
Committee memberMarino Brčić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Engineering Mechanics)
(Section of Solid Mechanics)
Rijeka
Defense date and country2024-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu je prikazan primjer optimizacije konstrukcije modularnih kontejnera koji se mogu slagati jedan na drugi. Kako bi se optimizacija mogla provesti bilo je potrebno preliminarno odrediti mnogo stvari potrebnih za definiranje problema. Definirani su karakteristike materijala, geometrije profila koji se mogu koristiti za konstrukciju, ograničenja same konstrukcije i profila u obliku dopuštenih naprezanja i pomaka te sva opterećenja koja se javljaju u standardnom korištenju samih kontejnera. Dan je uvid u metodu konačnih elemenata i proces optimizacije. Opisan je proces optimizacije kontejnera i njegove iteracije. Na kraju optimizacije usvojene su završne debljine limova od kojih bi se mogao napraviti kontejner koji zadovoljava definirane uvijete te je provedena provjera završnog dizajna gdje se je provela numerička analiza tri kontejnera naslaganog jedan na drugog.
Abstract (english)
This paper presents an example of optimizing the frame of a modular office containers that can be stacked on top of each other. To conduct the optimization it was necessary to preliminarily determine many aspects required to define the problem. The characteristics of the materials, the geometry of the profiles that can be used for the construction, the constraints of the construction and the profiles in terms of allowable stresses and displacements were defined, as well as all the loads that occur during the standard use of the containers. An overview of the finite element method and the optimization process was provided. The container optimization process and its iterations were described. At the end of the optimization, the final sheet thicknesses were adopted to create a container that meets the defined conditions, and the final design was verified by conducting a numerical analysis of three containers stacked on top of each other.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:186651
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-07-15 18:10:40