prikaz prve stranice dokumenta POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14
Access restricted to students and staff of home institution
master's thesis
POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:374510
Biškup, Dennis
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Biškup, D. (2017). POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:374510

Biškup, Dennis. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:374510

Biškup, Dennis. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:374510

Biškup, D. (2017). 'POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:374510

Biškup D. POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:374510

D. Biškup, "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:374510

Metadata
TitlePOSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA KB-16.14
AuthorDennis Biškup
MentorBožo Smoljan (mentor)
MentorDario Iljkić (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prikazan je postupak toplinske obrade cementiranja strojnog dijeka KB-16.14, te mjerenje tvrdoće spomenutog strojnog dijela. Strojni dio KB-16.14 oblika čahure izrađen je od čelika oznake 16MnCrS5. Opisan je postupak cementiranja kao i postupak ispitivanja tvrdoće. Parametri postavljeni na početku obrade, kao što su tvrdoća i dubina cementiranog sloja, su se nakon izvedbe pokazali ispravnim. Rezultati mjerenja provedeni su na tvrdomjeru, Vickersovom metodom, nakon svake operacije. Cilj postupka je bio povećanje tvrdoć površinskog sloja, prema postavljenim zahtjevima, te je on i postignut. Navedeni postupak, kao i rezultati mjerenja tvrdoće popraćeni su slikama.
Abstract (english)
This paper describes the process of heat treating of case-carburizing machine part named KB- 16.14, and measuring the hardness of the mentioned machine part. Machine part KB-16.14 shell form is made of steel tags 16MnCrS5. The process of case-carburizing as well as the hardness test procedure are described. Parameters set at the beginning of process, such as hardness and layer hardness depth, are showed to be correct. The results of the mesurements were carried out with Vickers method, after each operaton. The goal of the process was to increase the hardness of the surface layer, acccording to requirements, and it was achieved. The procedure, as wass as the results of measurements of hardness are accompanied with pictures.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:374510
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-03-29 11:34:00