prikaz prve stranice dokumenta Spojka s centrifugalno stupnjevanim uključivanjem
  Download
PDF 5.59 MB
undergraduate thesis
Spojka s centrifugalno stupnjevanim uključivanjem
Rijeka: University of Rijeka, Faculty of Engineering, 2024. urn:nbn:hr:190:122796
Negovanović, Nina
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Construction Elements

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Negovanović, N. (2024). Spojka s centrifugalno stupnjevanim uključivanjem (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:122796

Negovanović, Nina. "Spojka s centrifugalno stupnjevanim uključivanjem." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:122796

Negovanović, Nina. "Spojka s centrifugalno stupnjevanim uključivanjem." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2024. https://urn.nsk.hr/urn:nbn:hr:190:122796

Negovanović, N. (2024). 'Spojka s centrifugalno stupnjevanim uključivanjem', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:122796

Negovanović N. Spojka s centrifugalno stupnjevanim uključivanjem [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2024 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:122796

N. Negovanović, "Spojka s centrifugalno stupnjevanim uključivanjem", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:190:122796

Metadata
TitleSpojka s centrifugalno stupnjevanim uključivanjem
Title (english)Clutch with centrifugally controlled actuation
AuthorNina Negovanović
MentorŽeljko Vrcan (mentor)
MentorKristina Marković (komentor)
Committee memberSamir Žic (predsjednik povjerenstva)
Committee memberŽeljko Vrcan (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Construction Elements)
Rijeka
Defense date and country2024-09-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu je opisana spojka s centrifugalno stupnjevanim uključivanjem za pogon trkaćeg automobila STR Viper GTS 2013, kao i sam princip rada spojke i izrada 3D računalnog modela. Opisana spojka sa diskovima izrađenim od sinteriranog željeza i čelika korištena je kod Top Fuel trkaćih automobila. Za ovakve trkaće automobile je najprihvatljivija kombinacija materijala koja podnosi visoka temperaturna opterećenja (izazvana trenjem klizanja tarnih parova), zatim koeficijent trenja između kontaktnih površina kojim se omogućuje potreban prijelaz brzina i blaga karakteristika kontakta između tarnih površina pri uključivanju spojke kako bi se vozaču omogućila sigurna i efikasna vožnja. Dimenzije spojke su određene unaprijed po uzoru na spojku Top Fuel Drugster automobila opisanih u radu. Za konstruiranje svih izvedbi su korišteni inženjerski programi Autodesk Inventor 2024 i Femap 2021.
Abstract (english)
In this paper is described a clutch with centrifugally controlled actuation for the drive of the STR Viper GTS 2013 racing car, as well as the very principle of the clutch and the creation of a 3D computer model. The described clutch with discs made of sintered iron and steel was used in Top Fuel racing cars. For such racing cars, the most acceptable combination of materials that can withstand high temperature loads (caused by the sliding friction of the friction surfaces), then the coefficient of friction between the contact surfaces, which enables the necessary speed transition, and the mild characteristic of the contact between the friction surfaces when engaging the clutch enableing the driver to drive safely and efficiently. The dimensions of the clutch are determined in advance based on the model of the clutch of the Top Fuel Drugster cars described in the paper. Autodesk Inventor 2024 and Femap 2021 are engineering programs that were used to construct all the designs.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:122796
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2024-09-10 13:09:28