prikaz prve stranice dokumenta POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32
Access restricted to students and staff of home institution
undergraduate thesis
POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:606736
Rudić, Martina
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Rudić, M. (2017). POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:606736

Rudić, Martina. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:606736

Rudić, Martina. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:606736

Rudić, M. (2017). 'POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 04 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:606736

Rudić M. POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 November 04] Available at: https://urn.nsk.hr/urn:nbn:hr:190:606736

M. Rudić, "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:606736

Metadata
TitlePOSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA GP-16.32
AuthorMartina Rudić
MentorBožo Smoljan (mentor)
MentorDario Iljkić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Postupci toplinske obrade strojnog dijela GP-16.32 bave se procesom toplinske obrade poznatim pod imenom cementacija. Rad je strukturiran da počinje od faznih pretvorbi čelika, te pobližeg opisivanja koje se promjene događaju unutar čelika u određenoj fazi. Nakon toga slijedi glavna problematika rada, odnosno postupak cementacije. U poglavlju o postupku cementacije se navode metode i tijek cementacije, te parametri koji su potrebni za cementaciju. Da bi proces cementacije bio završen potrebno je izvesti i toplinsku obradu kako bi se riješilo zaostalih naprezanja, a to je pobliže opisano u poglavlju toplinska obrada nakon procesa cementacije. Zadnje što je potrebno ispitati da bi cementacija bila uspješna je opisano u metodama ispitivanja kvalitete cementiranih slojeva. Zadnji dio rada se odnosi na praktični dio postupka toplinske obrade strojnog dijela GP-16.32, a to je izvedba postupka cementacije, gdje je slikovno i tekstualno detaljno prikazan tijek postupka obrade.
Abstract (english)
Heat treatment processes of the machine part GP-16.32 deal with the heat treatment process known as cementation. This thesis begins with the conversion phases of steel and a more detailed description of the changes occurring inside steel at each particular stage. This is followed by the main concern of this thesis, i.e. the cementation process. In the section on the cementation process, the methods and course of cementation as well as the parameters required for cementation are mentioned. For the cementation process to be completed, heat treatment should be performed so as to eliminate residual stresses, and this is described in greater detail in the heat treatment section after the cementation process. Finally, it is necessary to examine whether the cementation was successful, which is described in the quality testing methods of cemented layers. The last part of the thesis focuses on the practical part of the heat treatment process of the machine part GP-16.32, which is the execution of the cementation process, in which the process of cementation is described in detail.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:606736
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-06-28 08:02:13