prikaz prve stranice dokumenta MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)
Access restricted to students and staff of home institution
undergraduate thesis
MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:201833
Bujanić, Nikol
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Bujanić, N. (2017). MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE) (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:201833

Bujanić, Nikol. "MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:201833

Bujanić, Nikol. "MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:201833

Bujanić, N. (2017). 'MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 30 July 2024, https://urn.nsk.hr/urn:nbn:hr:190:201833

Bujanić N. MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE) [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 July 30] Available at: https://urn.nsk.hr/urn:nbn:hr:190:201833

N. Bujanić, "MATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:201833

Metadata
TitleMATERIJALI ZA ADITIVNE TEHNOLOGIJE (3D ISPISIVANJE)
AuthorNikol Bujanić
MentorSunčana Smokvina Hanza (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Svrha ovog rada je upoznavanje s tehnologijom 3D ispisivanja, kao i njenim pojedinostima, uključujući materijale i principe ispisivanja. Cilj je zaključiti do koje mjere su aditivne tehnologije prisutne u svijetu danas i do koje mjere će biti prisutne u budućnosti, a sam rad je strukturiran kako bi se na što jezgrovitiji način približio ovoj kompleksnoj disciplini. Analizom stručne literature i novijih postignuća u ovom području, primjetan je porast broja konvencionalnih kao i nekonvencionalnih materijala za ispisivanje. Aditivne tehnologije još uvijek ne mogu u potpunosti zamijeniti klasične, ali svojom fleksibilnošću obećavaju dostići istu razinu zastupljenosti.
Abstract (english)
The purpose of this paper is the introduction to the technology of 3D printing, as well as its particulars including the materials and the printing principles. The paper aims to determine to what extent are the additive technologies present in the world of today as well as the extent of their future presence, while the paper itself is structured in such a way as to approach the discipline in as thorough a fashion as possible. Through the analysis of scientific sources and literature and also newer achievements in this area, there is a noticeable increase of both conventional and unconventional printing materials. Additive technologies still can't fully replace the traditional ones, but they promise to reach the same level of representation through their flexibility.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:201833
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-21 09:17:29