prikaz prve stranice dokumenta ISPITIVANJE STROJNOG DIJELA MK.17-DI.50
Access restricted to students and staff of home institution
master's thesis
ISPITIVANJE STROJNOG DIJELA MK.17-DI.50
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:557780
Keleminec, Marino
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Keleminec, M. (2017). ISPITIVANJE STROJNOG DIJELA MK.17-DI.50 (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:557780

Keleminec, Marino. "ISPITIVANJE STROJNOG DIJELA MK.17-DI.50." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:557780

Keleminec, Marino. "ISPITIVANJE STROJNOG DIJELA MK.17-DI.50." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:557780

Keleminec, M. (2017). 'ISPITIVANJE STROJNOG DIJELA MK.17-DI.50', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:557780

Keleminec M. ISPITIVANJE STROJNOG DIJELA MK.17-DI.50 [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:190:557780

M. Keleminec, "ISPITIVANJE STROJNOG DIJELA MK.17-DI.50", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:557780

Metadata
TitleISPITIVANJE STROJNOG DIJELA MK.17-DI.50
AuthorMarino Keleminec
MentorSunčana Smokvina Hanza (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Nerazorne metode ispitivanja materijala su metode kojima ispitujemo stanje ispitnog materijala bez invanzivnog djelovanja na isti, koje se mogu nalaziti na površini ispitnog elementa ili unutar materijal od kojeg je ispitni element izrađen. Oblik, dimenzije, karakteristike, te kemijska i fizikalna svojstva ispitnog elementa prilikom ispitivanja se ne mijenjaju. Opisani su fizikalni principi, oprema i pribor koji se koriste prilikom ispitivanja. Uz navedeno prikazan je i redoslijed koraka koje je potrebno odraditi prilikom ispitivanja. Obrađene su metoda ispitivanja tekućim penetrantima (PT), ispitivanje magnetskim česticama (MT) i ispitivanje ultrazvukom (UT). Sve tri metode koristile su se prilikom ispitivanja strojnog dijela MK.17-DI.50, tj. kranske dizalice na brodu M/V „Platres“, gdje je ispitivanje tekućim penetrantima provedeno na zavarenom spoju prirubnice temelja kranske dizalice i pogonskog zupčanika dizalice. Magnetskim česticama ispitivalo se hvatište kranske dizalice, dok je ispitivanje ultrazvukom provedeno na zavarenom spoju prirubnice temelja kranske dizalice.
Abstract (english)
Non-destructive methods of testing materials are methods to examine the state of the test material without any invasive action on the same, which may be on the surface of the test element or within the material from which the test element is made. The shape, dimensions, characteristics, and chemical and physical properties of the test element during the test are not altered. Physical principles, equipment and accessories used for testing are described. In addition, the sequence of steps to be taken during the test is shown. The method of testing liquid penetrants (PT), magnetic resonance imaging (MT) and ultrasonic testing (UT) were performed. All three methods were used when testing the machine part MK.17-DI.50, ie a crane on the M / V "Platres" ship, where the penetration test was carried out on the welded joint of the crankshaft base and the crankshaft gear. Crank of the crane was tested with magnetic particles, while the ultrasound test was carried out on the welded joint of the crankshaft base flange.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:557780
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-26 09:05:50