prikaz prve stranice dokumenta MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA
Access restricted to students and staff of home institution
undergraduate thesis
MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:546861
Filiplić, Ivan
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Filiplić, I. (2017). MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:546861

Filiplić, Ivan. "MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:546861

Filiplić, Ivan. "MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:546861

Filiplić, I. (2017). 'MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:546861

Filiplić I. MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:546861

I. Filiplić, "MJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:546861

Metadata
TitleMJERENJE PROTOKA I ANALIZA POUZDANOSTI UREĐAJA
AuthorIvan Filiplić
MentorLado Kranjčević (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisana je primjena i princip rada različitih uređaja za mjerenje protoka. Isto tako, provedeno je mjerenje protoka turbinskim i ultrazvučnim mjeračem protoka te Venturijevom cijevi, pri tome je turbinski protokomjer poslužio kao kalibracijski uređaj kako bi se ocjenila točnost ulatrazvučnog protokomjera LRF-2000H tvrtke Longrun Industrial Instrument Co., Ltd, te ispitatala njegovu pouzdanost. Za izvođenje ispitivanja bilo je potrebno instalirati laboratorijsku opremu: crpku te uređaje za mjerenje tlaka i protoka. U radu je opisana sva laboratorijska oprema i sve njene karakteristike. Nakon eksperimentalne analize i statističke obrade dobivenih podataka, numerički je analiziran cjelokupni laboratorijski postav s privodnim cijevima, pumpama itd.. Sustav je numerički analiziran upotrebom softvera AFT Fathom. Provedbom analize, ulatrazvučnog protokomjera LRF-2000H tvrtke Longrun Industrial Instrument Co., Ltd, po potrebi je kalibriran te je utvrđena njegova pouzdanost.
Abstract (english)
This paper describes the application and operation principle of various flow measurement devices. Also, turbine flow measurement and ultrasonic flowmeter and Venturi tubes were performed, where the turbine flowmeter used as a calibration device to estimate the accuracy of the Longrun Industrial Instrument Co., Ltd LRF-2000H ultrasonic flowmeter, and investigated its reliability. To perform the test, it was necessary to install the lab equipment: the pump and the pressure and flow measuring devices. All laboratory equipment and all its features are described in the paper. After the experimental analysis and statistical processing of the data obtained, the system was analyzed numerically by the whole labaratory setup with entraining pipes, pumps, etc. The system is numerically analyzed using the AFT Fathom software. By conducting an analysis, the Longrun Industrial Instrument Co., Ltd.'s LRF-2000H ultrasonic flowmeter has been calibrated and its reliability is determined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:546861
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-26 09:28:11