prikaz prve stranice dokumenta POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07
Access restricted to students and staff of home institution
undergraduate thesis
POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:014641
Dundović, Hrvoje
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Dundović, H. (2017). POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07 (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:014641

Dundović, Hrvoje. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:014641

Dundović, Hrvoje. "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:014641

Dundović, H. (2017). 'POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:014641

Dundović H. POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07 [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:190:014641

H. Dundović, "POSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:014641

Metadata
TitlePOSTUPAK TOPLINSKE OBRADE STROJNOG DIJELA HD.17-ST.07
AuthorHrvoje Dundović
MentorDario Iljkić (mentor)
Committee memberGoran Cukor (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim radom je prikazan postupak toplinske obrade kaljenja strojnog dijela HD.17-ST.07. Također je proveden postupak izmjere tvrdoće strojnog dijela. Oznaka čelika je C45E. Opisan je postupak kaljenja, te ispitivanja tvrdoće. Tvrdoća se mjerila Rockwell metodom za svaku operaciju posebno. Glavni cilj je bio povećanje tvrdoće izratka, koji je na kraju uspješno postignut. Nakon kaljenja, izradak se podvrgnuo niskotemperaturnom popuštanju, kako bi se smanjila zaostala naprezanja.
Abstract (english)
This paper presents the heat treatment process of the molding of the machine part HD.17-ST.07. The machine part HD.17-ST.07. The hardness test of the machine part has been carried out. Steel is C45E. Calculation and hardness testing are described. Hardness was measured separately by the Rockwell method for each operation. The main goal was to increase the hardness of the work, which was finally achieved successfully. After hardening, the work was subjected to a low-temperature discharge to reduce residual stresses.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:014641
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-26 13:19:55