prikaz prve stranice dokumenta NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE
Access restricted to students and staff of home institution
master's thesis
NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:797358
Bakić, Marin
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Bakić, M. (2017). NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:797358

Bakić, Marin. "NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:797358

Bakić, Marin. "NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE." Master's thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:797358

Bakić, M. (2017). 'NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:797358

Bakić M. NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:797358

M. Bakić, "NUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:797358

Metadata
TitleNUMERIČKO ODREĐIVANJE RADNIH KARAKTERISTIKA CENTRIFUGALNE CRPKE
AuthorMarin Bakić
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu napravljena su numerička ispitivanja centrifugalne crpke koristeći software Solidworks, zatim ICEM CFD, te Ansys Fluent. Geometrija je napravljena prema nacrtima centrifugalne crpke sa eksperimentalnog ispitivanja na Tehničkom Sveučilištu Braunschweig. Ona je zatim podijeljena u tri zone koje su zasebno omrežene i povezane u Fluentu. Koristeći dostupne podatke sa eksperimentalnog ispitivanja, zadani su rubni uvjeti crpke i izvršene su simulacije protoka vode kroz crpku. Kao rezultat toga dobivena je ovisnost specifične snage o koeficijentu protoka uz promjenu turbulentnih modela u samom programu. Nakon toga pristupilo se simulaciji pojave rotirajuće kavitacije u području rotora crpke. Dobiveni rezultati ove simulacije pokazuju ovisnost specifične snage o kavitacijskom broju. Zbog nedostatka preciznih podataka o rubnim uvjetima u crpki i nedostataka točnih dimenzija same crpke, dobiveni rezultati pokazuju približne vrijednosti dobivene u eksperimentalnom ispitivanju uz određena odstupanja.
Abstract (english)
In this master thesis numerical studies of centrifugal pump have been carried out using software Solidworks, then ICEM CFD and Ansys Fluent. Geometry has been made according to centrifugal pump designs from experimental studies on Technical University of Braunschweig. After geometry has been made the pump was divided into three zones which have been meshed and appended in Fluent. By using available data from experimental studies, boundary conditions have been set and simulations of water flow through pump have been carried out. As a result, curve of pressure rise coefficient in dependence with flow coefficient has been made, with different turbulent models in Fluent. After that, simulation of rotating cavitation, in impeller area has been carried out. The results of this simulation shows pressure rise coefficient in dependence with cavitation number. Because of insufficent boundary conditions data in centrifugal pump and lack of precise geometry dimensions itself , the results are simmilar to experimental but there are some differences.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:797358
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-11-06 13:35:20