prikaz prve stranice dokumenta IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA
Access restricted to students and staff of home institution
undergraduate thesis
IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA
Rijeka: University of Rijeka, Faculty of Engineering, 2017. urn:nbn:hr:190:253635
Hinić, Andrej
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Hinić, A. (2017). IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:253635

Hinić, Andrej. "IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:253635

Hinić, Andrej. "IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2017. https://urn.nsk.hr/urn:nbn:hr:190:253635

Hinić, A. (2017). 'IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:253635

Hinić A. IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2017 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:253635

A. Hinić, "IZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:190:253635

Metadata
TitleIZRADA Q-h KRIVULJE RJEČINE UPOTREBOM RADARSKIH MJERENJA
AuthorAndrej Hinić
MentorLado Kranjčević (mentor)
MentorSiniša Družeta (komentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2017-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su opisani uređaji za mjerenje brzine strujanja fluida uključujući i povijesni pregled razvoja istih. Teorijski dio rada također obuhvaća i osnove mehanike fluida zajedno sa osnovama strujanja fluida u otvorenom kanalu. Pored ostalih mjernih uređaja gdje je njihov princip rada objašnjen ukratko, princip rada radarskih mjernih uređaja za mjerenje površinske brzine detaljno je obrađen na konkretnom primjeru, uređaju Viatronics SVR-3 Pro. Praktični dio rada sastojao se od odlaska na lokaciju Tvornica papira te mjerenja površinske brzine upotrebom radarskog uređaja. Osim toga, praktični dio uključuje i izvršenu kalibraciju mjernog uređaja te izračun korekcijskih faktora. Nakon izvršenih mjerenja, koristeći programski jezik Phython, dobivena je međusobna zavisnost površinske i srednje brzine toka na temelju kojih je izrađena nova Q-h krivulja.
Abstract (english)
This paper gives a representation of devices used for measuring the fluid flow velocity including their historical development. The theoretical part of the paper includes fluid mechanics basics along with the open channel fluid flow basics. In addition to other measuring devices where the operating principle is explained briefly, operating principle of radar measuring devices for surface velocity measuring is elaborated in detail using a concrete device, the Viatronics SVR-3 Pro. The practical part of the paper consisted of going to location ''Tvornica papira'' and measuring the surface velocity using a radar device. Also, the practical part included calibration of the measuring device and the calculation of the correction factors. After the measuring had been made, a correlation between the surface and the mean velocity was obtained using the Phython programming language, based on which the new Q-h curve was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:253635
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-11-14 10:04:22