prikaz prve stranice dokumenta VARIJABILNI POGON USISNIH VENTILA
Access restricted to students and staff of home institution
master's thesis
VARIJABILNI POGON USISNIH VENTILA
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:125385
Pejić, Marin
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Pejić, M. (2018). VARIJABILNI POGON USISNIH VENTILA (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:125385

Pejić, Marin. "VARIJABILNI POGON USISNIH VENTILA." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:125385

Pejić, Marin. "VARIJABILNI POGON USISNIH VENTILA." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:125385

Pejić, M. (2018). 'VARIJABILNI POGON USISNIH VENTILA', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:190:125385

Pejić M. VARIJABILNI POGON USISNIH VENTILA [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:125385

M. Pejić, "VARIJABILNI POGON USISNIH VENTILA", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:125385

Metadata
TitleVARIJABILNI POGON USISNIH VENTILA
AuthorMarin Pejić
MentorVladimir Medica (mentor)
MentorTomislav Mrakovčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2018-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovoga rada bio je za automobilski četverotaktni motor s prednabijanjem primijeniti sustav varijabilnog upravljanja ventilima faznim pomicanjem bregastog vratila (VVT). Za izradu ovoga rada koristio se program Lotus Engine Simulation. Izvršen je proračun za optimalno upravljanje ventilima pri različitim brzinama vrtnje na osnovu kojeg se dobio algoritam za optimalno upravljanje sustavom. Dobiveni rezultati su pokazali da je pri nižim i višim brzinama vrtnje pogodno kasnije, a pri srednjim brzinama ranije otvaranje. Za ovaj motor je isplativije pomicanje bazičnog kuta otvaranja od primjene VVT-a zbog malih dobitaka momenta. Proračunao se i pogonski moment bregastog vratila iz čega su dobivene dimenzije VVT-a. Na kraju je VVT sustav konstruiran te je opisan njegov princip rada. VVT je kompaktan sustav s kojim se dobije poboljšanje performansi motora uz neznatnu potrošnju energije. Zbog male veličine mogu se bez problema ugraditi na gotovo svaki motor.
Abstract (english)
The focus of this paper was to apply a variable valve timing system by cam phasing (VVT) in a supercharged fourstroke automotive engine. Program Lotus Engine Simulation was used for this work. A calculation was made to achieve the optimal valve timing at different engine speeds, which served as a base for the creation of the algorithm for the optimized valve timing. The calculated results showed that at low and high engine speeds later opening was preferable and at medium speeds earlier opening. For this engine it is more cost-effective to move the base angle than the VVT application due to the small gains of the torque. Camshaft drive torque was also calculated, from which the dimensions of the VVT were obtained. In the end, a VVT system was designed and its working principle was described. VVT is a compact system that improves engine performance with low energy consumption. Because of its small size, it is easy to fit almost every engine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:125385
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-02-05 10:15:13