prikaz prve stranice dokumenta PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:790266
Ćosić, Josip
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Ćosić, J. (2018). PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:790266

Ćosić, Josip. "PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:790266

Ćosić, Josip. "PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:790266

Ćosić, J. (2018). 'PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:790266

Ćosić J. PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:790266

J. Ćosić, "PRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:790266

Metadata
TitlePRORAČUN I KONSTRUKCIJA HIDRAULIČKI UPRAVLJANE TARNE SPOJKE
AuthorJosip Ćosić
MentorMarina Franulović (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2018-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisan je proračun i konstrukcija hidraulički upravljane tarne spojke koja se upotrebljava u brojnim inženjerskim sferama i mnogim strojnim sustavima. U prvoj cjelini su opisane najčešće vrste spojki, dok je u drugoj cjelini opisana hidraulički upravljana tarna spojka, te detaljan opis pojedinačnih dijelova spojke i način rada. U sljedećem je poglavlju napravljen detaljan proračun za dvije različite konstrukcijske izvedbe spojke. Prva izvedba je konstruirana na način da se opruga koja služi za vraćanje klipa u početni položaj nalazi na poziciji ispod lamela spojke. Kod druge konstrukcijske izvedbe izabrane su manje dimenzije lamela spojke, te je glavina konstruirana na način da su opruge spojke pozicionirane paralelno s lamelama. Ideja konstruiranja je bila izraditi jednostavnu konstrukciju hidraulički upravljane tarne spojke koja će u isto vrijeme biti pouzdana, funkcionalna i sigurna za upotrebu. Za konstruiranje hidraulički upravljane tarne spojke korišteni su inženjerski programi Catia V5R20 i AutoCAD 2012. U sklopu rada nalaze se sklopni nacrt i radionički nacrti sa svim dijelovima i uputama za izradu.
Abstract (english)
This paper describes the calculation and design of the hydraulic friction clutch which is used in many engineering spheres and many machine systems. In the first chapter are described the most common types of clutches, while in the second chapter is described the hydraulic friction clutct with detail description of the clutch parts and description of functioning system of the clutch. In the next chapter, a detailed calculation for two different constructional clutch designs has been made. The first clutch design is constructed with the spring which is used to return the piston to the initial position that is located at the position below the coupling plates. In the other constructional design are chosen the smaller dimensions of the coupling plates and the hub is designed in with the clutch springs positioned parallel to the plates. The idea of the design was to create a simple construction of a hydraulic friction clutch that will be dependable, functional and safe to use at the same time. Engineering programs Catia V5R20 and AutoCAD 2012 were used for designing this hydraulic friction clutch. This work includes also all drawings with all clutch parts with following instructions for clutch production.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:790266
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-06-14 11:29:40