prikaz prve stranice dokumenta Prednabijanje Ottovog motora
Access restricted to students and staff of home institution
master's thesis
Prednabijanje Ottovog motora
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:789662
Jaketič, Sandro
University of Rijeka
Faculty of Engineering
Department of Thermodynamics and Energy Engineering
Section of Marine Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Jaketič, S. (2018). Prednabijanje Ottovog motora (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:789662

Jaketič, Sandro. "Prednabijanje Ottovog motora." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:789662

Jaketič, Sandro. "Prednabijanje Ottovog motora." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:789662

Jaketič, S. (2018). 'Prednabijanje Ottovog motora', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:190:789662

Jaketič S. Prednabijanje Ottovog motora [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:190:789662

S. Jaketič, "Prednabijanje Ottovog motora", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:789662

Metadata
TitlePrednabijanje Ottovog motora
Title (english)Turbocharging of an spark ignition engine
AuthorSandro Jaketič
MentorTomislav Mrakovčić (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberTomislav Mrakovčić (član povjerenstva)
Committee memberOzren Bukovac (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Thermodynamics and Energy Engineering)
(Section of Marine Engineering)
Rijeka
Defense date and country2018-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog rada je odabrati turbopuhalo za povećanje snage automobilskog Otto motora sa slobodnim usisom. Potrebno je izvršiti analizu sustava prednabijanja bez hladnjaka zraka i s hladnjakom zraka koji je hlaĎen strujom okolnog zraka. U novije vrijeme automobilska industrija teži smanjenju emisija i potrošnje goriva, a da se uz to snaga i zakretni moment povećaju bez promjena radnog obujma i brzine vrtnje. Jedan od najboljih načina za postizanje svega navedenog je prednabijanje zraka primjenom turbopuhala. U radu je objašnjen princip rada četverotaktnog Otto motora te njegovi osnovni elementi. Nakon toga opisan je postupak prednabijanja i različite izvedbe prednabijanja zraka. Za izradu simulacije motora korišten program Lotus Engine Simulation. Rezultati simulacije prikazani su u dijagramima gdje se jasno vidi povećanje performansi motora primjenom turbopuhala u usporedbi s motorom sa slobodnim usisom.
Abstract (english)
This work's topic is to choose turbocharger to increase the power of naturally aspirated spark ignition engine. It is necessary to perform the analyses of turbocharging system without intercooler and with intercooler which is cooled by the surrounding airflow. Car industry has recently been trying to decrease the engine emissions and fuel consumption, and at the same time to increase the power and torque without changing the engine displacement and rotational speed. One of the best ways to achieve this is turbocharging. Spark ignition engine and its basic elements have been explained in this work. Turbocharging and its different layouts have been presented afterwards. Lotus Engine Simulation programme has been used for the simulation of the engine. The results of the simulation have been shown in graphs which clearly show the improvement of engine performances by using turbocharger compared to the naturally aspirated engine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:789662
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-07-20 08:06:11